On 03.12.2017 17:54, John David Anglin wrote: > Fails early, probably in palo. I don't have a boot log as the machine has a graphics console. > > ii linux-image-4.13.0-1-parisc64-smp 4.13.13-1 hppa Linux 4.13 for multiprocessor 64-bit PA-RISC > ii linux-image-4.14.0-1-parisc64-smp 4.14.2-1 hppa Linux 4.14 for multiprocessor 64-bit PA-RISC > > The 4.13.13-1 kernel boots okay. > > root@hiauly6:/var/log# dpkg -l palo > ii palo 1.99 hppa Linux boot loader for HP PA-RISC Strange. It works nicely for me on my C3700 machine: palo ipl 1.99 http://www.parisc-linux.org - Fri, 18 Aug 2017 11:50:44 +0200 Skipping extended partition 6 - beyond reach of IPL Partition Start(MB) End(MB) Id Type 1 2 33 f0 Palo 2 34 157 83 ext2 5 159 134887 83 ext2 PALO(F0) partition contains: 0/vmlinux64 18847280(0) bytes @ 0x140000 Information: No console specified on kernel command line. This is normal. PALO will choose the console currently used by firmware (serial). Command line for kernel: 'root=LABEL=ROOT rootfstype=ext4 HOME=/ panic_timeout=60 panic=-1 console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux' Selected kernel: /vmlinux from partition 2 Selected ramdisk: /initrd.img from partition 2 ELF64 executable Entry 00100000 first 00100000 n 5 Segment 0 load 00100000 size 463104 mediaptr 0x1000 Segment 1 load 00172000 size 210976 mediaptr 0x73000 Segment 2 load 00200000 size 10634416 mediaptr 0xa7000 Segment 3 load 00c25000 size 3194732 mediaptr 0xacc000 Segment 4 load 01000000 size 2631320 mediaptr 0xdd8000 Loading ramdisk 21583160 bytes @ 3eb59000... Branching to kernel entry point 0x00100000. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org [ 0.000000] Linux version 4.14.0-1-parisc64-smp (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 7.2.0 (GCC)) #1 SMP Debian 4.14.2-1 (2017-11-30) [ 0.000000] unwind_init: start = 0x40ed19cc, end = 0x40f30f6c, entries = 24410 [ 0.000000] FP[0] enabled: Rev 1 Model 19 [ 0.000000] The 64-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size. [ 0.000000] bootconsole [ttyB0] enabled [ 0.000000] Initialized PDC Console for debugging. [ 0.000000] Determining PDC firmware type: System Map. [ 0.000000] model 00005dc0 00000481 00000000 00000002 777c3e84 100000f0 00000008 000000b2 000000b2 [ 0.000000] random: fast init done [ 0.000000] vers 00000301 [ 0.000000] CPUID vers 19 rev 11 (0x0000026b) [ 0.000000] capabilities 0x7 [ 0.000000] model 9000/785/C3700 [ 0.000000] Memory Ranges: [ 0.000000] 0) Start 0x0000000000000000 End 0x000000007fffffff Size 2048 MB [ 0.000000] Total Memory: 2048 MB [ 0.000000] initrd: 7eb59000-7ffee538 [ 0.000000] initrd: reserving 3eb59000-3ffee538 (mem_max 80000000) [ 0.000000] PDT: type PDT_PDC, size 50, entries 0, status 2, dbe_loc 0xffffffffffffffff, good_mem 30 MB [ 0.000000] PDT: Firmware reports all memory OK. [ 0.000000] LCD display at fffffff0f05d0008,fffffff0f05d0000 registered [ 0.000000] percpu: Embedded 27 pages/cpu @00000000bdf25000 s71712 r8192 d30688 u110592 [ 0.000000] SMP: bootstrap CPU ID is 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Kernel command line: root=LABEL=ROOT rootfstype=ext4 HOME=/ panic_timeout=60 panic=-1 console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 2016828K/2097152K available (10388K kernel code, 4294K rwdata, 1376K rodata, 1024K init, 848K bss, 80324K reserved, 0K cma-re) [ 0.000000] virtual kernel memory layout: 0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB) 0.000000] memory : 0x0000000040000000 - 0x00000000c0000000 (2048 MB) 0.000000] .init : 0x0000000040100000 - 0x0000000040200000 (1024 kB) 0.000000] .data : 0x0000000040c25000 - 0x00000000411aeae0 (5670 kB) 0.000000] .text : 0x0000000040200000 - 0x0000000040c25000 (10388 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 128 [ 0.000011] sched_clock: 64 bits at 750MHz, resolution 1ns, wraps every 4398046511103ns [ 0.105387] Console: colour dummy device 160x64 [ 0.164070] Calibrating delay loop... 1494.01 BogoMIPS (lpj=2988032) [ 0.268015] pid_max: default: 32768 minimum: 301 [ 0.332805] Security Framework initialized [ 0.384023] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.472195] AppArmor: AppArmor initialized [ 0.528261] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.616096] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.714533] Hierarchical SRCU implementation. [ 0.773725] smp: Bringing up secondary CPUs ... [ 0.832023] smp: Brought up 1 node, 1 CPU [ 0.888943] devtmpfs: initialized [ 0.934735] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.060069] futex hash table entries: 2048 (order: 4, 65536 bytes) [ 1.146496] NET: Registered protocol family 16 [ 1.205279] EISA bus registered [ 1.248220] Searching for devices... [ 1.524013] Found devices: [ 1.560030] 1. Astro BC Runway Port at 0xfffffffffed00000 [10] { 12, 0x0, 0x582, 0x0000b } [ 1.668024] 2. Elroy PCI Bridge at 0xfffffffffed30000 [10/0] { 13, 0x0, 0x782, 0x0000a } [ 1.776024] 3. Elroy PCI Bridge at 0xfffffffffed32000 [10/1] { 13, 0x0, 0x782, 0x0000a } [ 1.880067] 4. Elroy PCI Bridge at 0xfffffffffed38000 [10/4] { 13, 0x0, 0x782, 0x0000a } [ 1.988029] 5. Elroy PCI Bridge at 0xfffffffffed3c000 [10/6] { 13, 0x0, 0x782, 0x0000a } [ 2.096025] 6. Allegro W2 at 0xfffffffffffa0000 [32] { 0, 0x0, 0x5dc, 0x00004 } [ 2.192032] 7. Memory at 0xfffffffffed10200 [49] { 1, 0x0, 0x09c, 0x00009 } [ 2.284022] Enabling regular chassis codes support v0.05 [ 2.484589] CPU(s): 1 out of 1 PA8700 (PCX-W2) at 750.000000 MHz online [ 2.579703] Cache flush threshold set to 656 KiB [ 2.642776] TLB flush threshold set to 40 KiB [ 2.728384] SBA found Astro 2.1 at 0xfffffffffed00000 [ 2.796089] Elroy version TR4.0 (0x5) found at 0xfffffffffed30000 [ 2.876889] LBA 10:0: PCI host bridge to bus 0000:00 [ 2.940077] pci_bus 0000:00: root bus resource [io 0x0000-0x1fff] [ 3.024025] pci_bus 0000:00: root bus resource [mem 0xfffffffff4000000-0xfffffffff47fffff] (bus address [0xf4000000-0xf47fffff]) [ 3.176030] pci_bus 0000:00: root bus resource [bus 00] [ 3.246230] PCI: Enabled native mode for NS87415 (pif=0x8f) [ 3.325864] Elroy version TR4.0 (0x5) found at 0xfffffffffed32000 [ 3.404350] LBA 10:1: PCI host bridge to bus 0000:01 [ 3.468034] pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff]) [ 3.588028] pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff]) [ 3.740027] pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff]) [ 3.892075] pci_bus 0000:01: root bus resource [bus 01] [ 3.964261] iosapic: hpa not registered for 0000:01:04.0 [ 4.032386] Elroy version TR4.0 (0x5) found at 0xfffffffffed38000 [ 4.112359] LBA 10:4: PCI host bridge to bus 0000:02 [ 4.180035] pci_bus 0000:02: root bus resource [io 0x28000-0x29fff] (bus address [0x8000-0x9fff]) [ 4.296037] pci_bus 0000:02: root bus resource [mem 0xfffffffff9000000-0xfffffffff9ffffff] (bus address [0xf9000000-0xf9ffffff]) [ 4.448027] pci_bus 0000:02: root bus resource [mem 0xfffffffff6000000-0xfffffffff67fffff] (bus address [0xf6000000-0xf67fffff]) [ 4.600028] pci_bus 0000:02: root bus resource [bus 02] [ 4.672818] iosapic: hpa not registered for 0000:02:03.0 [ 4.740384] Elroy version TR4.0 (0x5) found at 0xfffffffffed3c000 [ 4.820337] LBA 10:6: PCI host bridge to bus 0000:03 [ 4.888169] pci_bus 0000:03: root bus resource [io 0x3c000-0x3dfff] (bus address [0xc000-0xdfff]) [ 5.004028] pci_bus 0000:03: root bus resource [mem 0xfffffffff7000000-0xfffffffff77fffff] (bus address [0xf7000000-0xf77fffff]) [ 5.156028] pci_bus 0000:03: root bus resource [bus 03] [ 5.231823] powersw: Soft power switch at 0xfffffff0f0400804 enabled. [ 5.324572] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 5.414856] vgaarb: loaded [ 5.536173] VFS: Disk quotas dquot_6.6.0 [ 5.584191] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.677237] AppArmor: AppArmor Filesystem Enabled [ 5.752377] NET: Registered protocol family 2 [ 5.809256] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 5.904358] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 5.992506] TCP: Hash tables configured (established 16384 bind 16384) [ 6.080017] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 6.156095] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 6.244329] NET: Registered protocol family 1 [ 6.300164] SuperIO: Found NS87560 Legacy I/O device at 0000:00:0e.1 (IRQ 68) [ 6.392059] SuperIO: Serial port 1 at 0x3f8 [ 6.448033] SuperIO: Serial port 2 at 0x2f8 [ 6.504030] SuperIO: Parallel port at 0x378 [ 6.560029] SuperIO: Floppy controller at 0x3f0 [ 6.620029] SuperIO: ACPI at 0x7e0 [ 6.664173] SuperIO: USB regulator enabled [ 6.720535] Unpacking initramfs... [ 8.418641] Freeing initrd memory: 21076K [ 8.468240] clocksource: cr16: mask: 0xffffffffffffffff max_cycles: 0xacf9151134, max_idle_ns: 440795214493 ns [ 8.600118] clocksource: Switched to clocksource cr16 [ 8.668487] Enabling PDC chassis warnings support v0.05 [ 8.737457] Performance monitoring counters enabled for Allegro W2 [ 8.820610] audit: initializing netlink subsys (disabled) [ 8.892858] audit: type=2000 audit(1512332275.887:1): state=initialized audit_enabled=0 res=1 [ 9.005130] workingset: timestamp_bits=43 max_order=19 bucket_order=0 [ 9.090093] zbud: loaded [ 37.399022] Key type asymmetric registered [ 37.453199] Asymmetric key parser 'x509' registered [ 37.517670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 37.615329] io scheduler noop registered [ 37.666936] io scheduler deadline registered [ 37.723196] io scheduler cfq registered (default) [ 37.785042] io scheduler mq-deadline registered [ 37.848242] PDC Stable Storage facility v0.30 [ 38.242827] STI GSC/PCI core graphics driver Version 0.9b [ 38.314013] sti 0000:01:04.0: enabling SERR and PARITY (0002 -> 0142) [ 38.398777] STI PCI graphic ROM found at fffffffff4800000 (64 kB), fb at fffffffffa000000 (32 MB) [ 38.589866] STI ROM supports 32 bit firmware functions. [ 38.658624] STI selected 8x16 framebuffer font VGA8x16 for sticon [ 38.738834] id 2d08c0a7-9a02587, conforms to spec rev. 8.0a [ 38.818440] graphics card name: PCI_GRAFFITIX1280 [ 38.884947] sticon: Initializing STI text console. [ 38.950364] Console: switching to colour STI console 160x64 [ 40.143996] Console: switching to colour frame buffer device 160x64 [ 40.311231] fb0: stifb 1280x1024-8 frame buffer device, PCI_GRAFFITIX1280, id: 2d08c0a7, mmio: 0xfffffffffa100000 [ 40.446579] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 40.529275] serial8250: ttyS0 at I/O 0x3f8 (irq = 3, base_baud = 115200) is a 16550A [ 40.631226] console [ttyS0] enabled [ 40.631226] console [ttyS0] enabled [ 40.718823] bootconsole [ttyB0] disabled [ 40.718823] bootconsole [ttyB0] disabled [ 40.817599] serial8250: ttyS1 at I/O 0x2f8 (irq = 4, base_baud = 115200) is a 16550A [ 40.911496] Linux agpgart interface v0.103 [ 40.960513] quicksilver: No Pluto found, so no AGPGART for you. [ 41.032072] mousedev: PS/2 mouse device common for all mice [ 41.100946] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 41.186564] ledtrig-cpu: registered to indicate activity on CPUs [ 41.259160] NET: Registered protocol family 10 [ 41.313938] Segment Routing with IPv6 [ 41.357891] mip6: Mobile IPv6 [ 41.393475] NET: Registered protocol family 17 [ 41.446735] mpls_gso: MPLS GSO support [ 41.492542] registered taskstats version 1 [ 41.541680] zswap: loaded using pool lzo/zbud [ 41.594084] AppArmor: AppArmor sha1 policy hashing enabled [ 41.659839] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 41.737476] rtc-generic rtc-generic: setting system clock to 2017-12-03 20:18:29 UTC (1512332309) [ 41.847263] Freeing unused kernel memory: 1024K [ 41.901682] Write protecting the kernel read-only data: 1376k Loading, please wait... starting version 235 [ 42.622004] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) [ 42.897074] SCSI subsystem initialized [ 42.997992] usbcore: registered new interface driver usbfs [ 43.185917] tulip0: no phy info, aborting mtable build [ 43.248289] tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1 [ 43.403892] usbcore: registered new interface driver hub [ 43.468955] usbcore: registered new device driver usb [ 43.545569] net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xfffffffff4008000, 00:30:6e:48:aa:64, IRQ 66 [ 43.662804] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 43.749973] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 44.058247] sym0: <896> rev 0x7 at pci 0000:00:0f.0 irq 69 [ 44.146187] ehci-pci: EHCI PCI platform driver [ 44.207519] ohci-pci: OHCI PCI platform driver [ 44.263747] sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking [ 44.345873] sym0: SCSI BUS has been reset. [ 44.398567] sym0: SCSI BUS mode change from SE to SE. [ 44.402517] sym0: SCSI BUS has been reset. [ 44.510541] scsi host0: sym-2.2.3 [ 44.558573] scsi host1: pata_ns87415 [ 44.602583] scsi host2: pata_ns87415 [ 44.646201] ata1: PATA max MWDMA2 cmd 0xf00 ctl 0xe00 bmdma 0xa00 irq 7 [ 44.725467] ata2: PATA max MWDMA2 cmd 0xd00 ctl 0xb00 bmdma 0xa08 irq 7 [ 44.809407] ohci-pci 0000:00:0e.2: OHCI PCI host controller [ 44.878682] ohci-pci 0000:00:0e.2: new USB bus registered, assigned bus number 1 [ 44.974847] ohci-pci 0000:00:0e.2: irq 1, io mem 0xfffffffff4007000 [ 45.050734] ata1.00: ATAPI: CD-532E-B, 2.0A, max MWDMA2 [ 45.113995] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 45.195337] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 45.281870] usb usb1: Product: OHCI PCI host controller [ 45.344439] usb usb1: Manufacturer: Linux 4.14.0-1-parisc64-smp ohci_hcd [ 45.424731] usb usb1: SerialNumber: 0000:00:0e.2 [ 45.482667] hub 1-0:1.0: USB hub found [ 45.528256] ata1.00: configured for MWDMA2 [ 45.577541] hub 1-0:1.0: 3 ports detected [ 45.860693] sym1: <896> rev 0x7 at pci 0000:00:0f.1 irq 69 [ 45.952012] sym1: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking [ 46.035227] sym1: SCSI BUS has been reset. [ 46.087344] scsi host3: sym-2.2.3 [ 49.544849] scsi: waiting for bus probes to complete ... [ 50.645610] scsi 3:0:5:0: Direct-Access COMPAQ BF14688577 HPB2 PQ: 0 ANSI: 3 [ 50.742525] scsi target3:0:5: tagged command queuing enabled, command queue depth 16. [ 50.836430] scsi target3:0:5: Beginning Domain Validation [ 50.908934] scsi target3:0:5: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) [ 51.000937] scsi target3:0:5: Domain Validation skipping write tests [ 51.077043] scsi target3:0:5: Ending Domain Validation [ 51.140476] scsi 3:0:6:0: Direct-Access HP 36.4G ST336607LC HPC3 PQ: 0 ANSI: 3 [ 51.237417] scsi target3:0:6: tagged command queuing enabled, command queue depth 16. [ 51.331258] scsi target3:0:6: Beginning Domain Validation [ 51.401333] scsi target3:0:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) [ 51.491687] scsi target3:0:6: Domain Validation skipping write tests [ 51.567819] scsi target3:0:6: Ending Domain Validation [ 53.986246] scsi 1:0:0:0: CD-ROM TEAC CD-532E-B 2.0A PQ: 0 ANSI: 5 [ 54.345230] sd 3:0:5:0: [sda] 286749488 512-byte logical blocks: (147 GB/137 GiB) [ 54.435111] sd 3:0:6:0: [sdb] 71132960 512-byte logical blocks: (36.4 GB/33.9 GiB) [ 54.544706] sd 3:0:6:0: [sdb] Write Protect is off [ 54.602514] sd 3:0:5:0: [sda] Write Protect is off [ 54.661805] sd 3:0:5:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 54.764987] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray [ 54.852578] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 54.915192] sd 3:0:6:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 55.048066] sda: sda1 sda2 sda3 < sda5 sda6 > [ 55.101515] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > [ 55.181368] sd 3:0:5:0: [sda] Attached SCSI disk [ 55.259224] random: crng init done [ 55.317226] sd 3:0:6:0: [sdb] Attached SCSI disk Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.30.2 [/sbin/fsck.ext4 (1) -- /dev/sda5] fsck.ext4 -a -C0 /dev/sda5 ROOT: clean, 98931/8626176 files, 3246659/34490624 blocks done. [ 56.841651] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: systemd-udevdstarting version 235 . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...[ 61.084525] sd 3:0:5:0: Attached scsi generic sg0 type 0 [ 62.130990] sd 3:0:6:0: Attached scsi generic sg1 type 0 [ 62.623219] sr 1:0:0:0: Attached scsi generic sg2 type 5 done. Activating swap...[ 66.411887] Adding 5249020k swap on /dev/sda6. Priority:-2 extents:1 across:5249020k FS done. [ 66.781479] net eth0: Setting full-duplex based on MII#1 link partner capability of 05e1 [ 66.968703] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro Activating lvm and md swap...done. Checking file systems...fsck from util-linux 2.30.2 BOOT: clean, 23/31744 files, 90532/126976 blocks done. Cleaning up temporary files... /tmp. [ 71.094991] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 71.188204] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Starting AppArmor profiles:Mounting securityfs on /sys/kernel/security...Warning from stdin (line 1): /sbin/apparmor_parser: cannot use or update can Warning failed to create cache: (null) . Setting kernel variables...done. Configuring network interfaces...ifup: interface eth0 already configured done. Starting RPC port mapper daemon: rpcbind. [ 74.873589] RPC: Registered named UNIX socket transport module. [ 74.944511] RPC: Registered udp transport module. [ 75.000885] RPC: Registered tcp transport module. [ 75.057223] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 75.214198] FS-Cache: Loaded [ 75.387633] FS-Cache: Netfs 'nfs' registered for caching [ 75.619736] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). Starting NFS common utilities: statd idmapd. Cleaning up temporary files.... Setting up ALSA...done. Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Starting enhanced syslogd: rsyslogd. Starting system message bus: dbus. Starting cgroup management daemon: cgmanagerStarting virtual private network daemon:. Starting anac(h)ronistic cron: anacron. Starting Apache httpd web server: apache2. Starting deferred execution scheduler: atd. Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. Starting cgroup management proxy daemon: cgproxy. Starting periodic command scheduler: cron. Starting SMP IRQ Balancer: irqbalance. saned disabled; edit /etc/default/saned. Starting OpenBSD Secure Shell server: sshd. Starting MTA: exim4. ALERT: exim paniclog /var/log/exim4/paniclog has non-zero size, mail system possibly broken Debian GNU/Linux buster/sid c3000 ttyS0 c3000 login: -- To unsubscribe from this list: send the line "unsubscribe linux-parisc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
