On 2017-08-03, at 6:45 PM, Helge Deller wrote: > On 03.08.2017 17:58, John David Anglin wrote: >> On 2017-08-03, at 10:07 AM, Tom Bogendoerfer wrote: >> >>> Is this a known problem ? Source tree is current parisc git. >> >> I don't think so. Doesn't happen on rp3440: > > I had lots of such problems when I tried various VGA and other > PCI cards in my c3000. > > I think HP designed many of the PCI slots for special usage only, > e.g. some slots allow PCI graphic cards while others don't. > > Maybe plug your cards one-by-one into another slot and check again? There's something about the firmware disabling dual graphics adapters in slots 1 or 2 if another is plugged into 3 or 4 in the user guide. I would try slot 4 first. Some C series units had feeble power supplies and various combination of HP graphics cards aren't supported. The c3000 has some PCIX slots and maybe both 3.3 and 5V PCI slots. I suggest 64bit kernel as it is best tested. Dave -- John David Anglin dave.anglin@xxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-parisc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
