On Friday 02 January 2015 03:36 AM, James Bottomley wrote:
On Thu, 2015-01-01 at 00:52 -0800, James Bottomley wrote:
On Wed, 2014-12-31 at 23:56 -0500, Peter Hurley wrote:
On 12/31/2014 08:33 PM, James Bottomley wrote:
On Tue, 2014-11-11 at 20:13 +0100, Helge Deller wrote:
While testing kernel 3.18-rc4 I'm facing a problem with serial console.
I'm seeing at bootup this message:
[ 17.724000] console [ttyS0] disabled
after that it's just hanging.
It seems as if ttyS0 is somehow being reprogrammed which then disturbs the
serial ports on the receiver side (in my case a HP PCI Diva Serial [GSP] Multiport UART).
Any idea what changed between 3.17 and 3.18 which have caused this behavior ?
Full log below.
Helge
I apologize that I did not see this email back in November; I was having some
email trouble at the time.
serial driver: drivers/tty/serial/8250/8250_pci.c
PCI info:
00:04.1 Serial controller: Hewlett-Packard Company Diva Serial [GSP] Multiport UART (rev 03) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Device 1283
Flags: medium devsel, IRQ 70
Memory at ffffffff80000000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 0040 [size=64]
Capabilities: [48] Power Management version 2
Kernel driver in use: serial
dmesg after bootup:
[ 17.708000] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
[ 17.724000] serial 0000:00:04.1: enabling device (0142 -> 0143)
[ 17.724000] console [ttyS0] disabled
[ 17.880000] serial 0000:00:04.1: ttyS0 at MMIO 0xffffffff80000000 (irq = 70, base_baud = 115200) is a 16550A
[ 17.996000] console [ttyS0] enabled
[ 38.888000] INFO: rcu_sched detected stalls on CPUs/tasks: { 3} (detected by 1, t=5252 jiffies, g=-290, c=-291, q=2)
[ 38.888000] Task dump for CPU 3:
[ 38.888000] swapper/0 R running task 0 1 0 0x00000004
[ 38.888000] Backtrace:
[ 38.888000] [<0000000040200848>] vprintk_emit+0x570/0x5f8
[ 38.888000] [<0000000040200bdc>] printk+0x64/0x78
[ 38.888000] [<0000000040201fc0>] register_console+0x438/0x550
[ 38.888000] [<0000000040688bb8>] uart_add_one_port+0x400/0x5d0
[ 38.888000] [<000000004068e6d4>] serial8250_register_8250_port+0x3e4/0x448
[ 38.888000] [<0000000040695f44>] pciserial_init_ports+0x22c/0x2c8
[ 38.888000] [<0000000040696628>] pciserial_init_one+0x250/0x2e0
[ 38.888000] [<00000000405f3880>] pci_device_probe+0xb0/0x150
[ 38.888000] [<00000000406a8244>] driver_probe_device+0x204/0x570
[ 38.888000] [<00000000406a8728>] __driver_attach+0xe0/0x158
[ 38.888000] [<00000000406a4558>] bus_for_each_dev+0xd0/0x128
[ 38.888000] [<00000000406a76f8>] driver_attach+0x48/0x60
[ 38.888000] [<00000000406a6de8>] bus_add_driver+0x268/0x460
[ 38.888000] [<00000000406a915c>] driver_register+0x124/0x1d0
[ 38.888000] [<00000000405f336c>] __pci_register_driver+0x64/0x78
[ 38.888000] [<00000000401375e4>] serial_pci_driver_init+0x44/0x58
[ 59.084000] timer_interrupt(CPU 3): delayed! cycles 85EBC4C7D rem 2BAF83 next/now 2765C08677/276594D6F4
[ 59.140000] bootconsole [ttyB0] disabled
[ 59.144000] serial 0000:00:04.1: ttyS1 at MMIO 0xffffffff80000008 (irq = 70, base_baud = 115200) is a 16450
[ 59.164000] serial 0000:00:04.1: ttyS2 at MMIO 0xffffffff80000010 (irq = 70, base_baud = 115200) is a 16550A
I confirm this behaviour on the Mako system as well. In my case, 3.18
so royally screws up the serial port that even a power cycle won't
recover the console connection to the MP (a sort of parisc equivalent of
a BMC) and I have to go down to the machine room to physically yank the
power from the system to power down the MP and get the console back.
I've added a cc to linux-serial. It looks like there are 20 non merge
commits between 3.17 and 3.18. I'm betting because of the MP problem
it's got to be somewhere in the serial driver:
cd92208 tty: serial: 8250_mtk: Fix quot calculation
716e115 serial: 8250_pci: remove rts_n override from Baytrail quirk
1ede7dc serial: 8250: Add Quark X1000 to 8250_pci.c
9137568 tty: serial: 8250_core: remove UART_IER_RDI in
serial8250_stop_rx()
59b3e89 tty: serial: 8250_core: use the ->line argument as a hint in
serial8250_find_match_or_unused()
^^^^^^^^^
This commit would be my first guess, but a complete dmesg up to boot
failure would be helpful in narrowing down the problem. There are about
50 ways to initialize the 8250 port (which is part of the problem).
Well, bisection says it's not this one. Unfortunately, we crap out at
this one:
ae14a79 tty: serial: 8250_core: provide a function to export
uart_8250_port
CC drivers/tty/serial/8250/8250_core.o
drivers/tty/serial/8250/8250_core.c: In function 'serial8250_ioctl':
drivers/tty/serial/8250/8250_core.c:2857: error: 'TIOCSRS485' undeclared
(first use in this function)
drivers/tty/serial/8250/8250_core.c:2857: error: (Each undeclared
identifier is reported only once
drivers/tty/serial/8250/8250_core.c:2857: error: for each function it
appears in.)
drivers/tty/serial/8250/8250_core.c:2858: error: implicit declaration of
function 'copy_from_user'
drivers/tty/serial/8250/8250_core.c:2869: error: 'TIOCGRS485' undeclared
(first use in this function)
drivers/tty/serial/8250/8250_core.c:2870: error: implicit declaration of
function 'copy_to_user'
make[4]: *** [drivers/tty/serial/8250/8250_core.o] Error 1
make[3]: *** [drivers/tty/serial/8250] Error 2
make[2]: *** [drivers/tty/serial] Error 2
make[1]: *** [drivers/tty] Error 2
I'll work out how to fix it in the morning ... but really, having a
bisectable tree is supposed to be the first rule of a maintainer.
OK, I managed to bisect the rest of the tree compensating for the build
failure. This is the failing commit (cc's added):
commit 2f2dafe77df2c78e189a9fa6b1879dffd06ae5a1
Author: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
Date: Mon Sep 1 20:49:43 2014 +0530
serial: serial_core.c: printk replacement
I've confirmed by reverting against 3.19-rc2 and the system boots again.
This looks like a symptom of underlying problems within the dev_ print
helper accessors, so I'll dig further, but we'll need this reverted in
the meantime.
Sure.
can dev_print hang the machine? if dev is NULL, it will just print using
printk.
in vprintk_emit(), there is an Ouch for printk recursing into itself.
can that be the cause?
and, can i help you somehow to find out the root cause of this ?
thanks
sudip
James
--
To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html