On 12/31/2014 08:33 PM, James Bottomley wrote: > On Tue, 2014-11-11 at 20:13 +0100, Helge Deller wrote: >> While testing kernel 3.18-rc4 I'm facing a problem with serial console. >> >> I'm seeing at bootup this message: >> [ 17.724000] console [ttyS0] disabled >> after that it's just hanging. >> >> It seems as if ttyS0 is somehow being reprogrammed which then disturbs the >> serial ports on the receiver side (in my case a HP PCI Diva Serial [GSP] Multiport UART). >> Any idea what changed between 3.17 and 3.18 which have caused this behavior ? >> Full log below. >> >> Helge I apologize that I did not see this email back in November; I was having some email trouble at the time. >> serial driver: drivers/tty/serial/8250/8250_pci.c >> >> PCI info: >> 00:04.1 Serial controller: Hewlett-Packard Company Diva Serial [GSP] Multiport UART (rev 03) (prog-if 02 [16550]) >> Subsystem: Hewlett-Packard Company Device 1283 >> Flags: medium devsel, IRQ 70 >> Memory at ffffffff80000000 (32-bit, non-prefetchable) [size=4K] >> I/O ports at 0040 [size=64] >> Capabilities: [48] Power Management version 2 >> Kernel driver in use: serial >> >> >> dmesg after bootup: >> >> [ 17.708000] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled >> [ 17.724000] serial 0000:00:04.1: enabling device (0142 -> 0143) >> [ 17.724000] console [ttyS0] disabled >> [ 17.880000] serial 0000:00:04.1: ttyS0 at MMIO 0xffffffff80000000 (irq = 70, base_baud = 115200) is a 16550A >> [ 17.996000] console [ttyS0] enabled >> [ 38.888000] INFO: rcu_sched detected stalls on CPUs/tasks: { 3} (detected by 1, t=5252 jiffies, g=-290, c=-291, q=2) >> [ 38.888000] Task dump for CPU 3: >> [ 38.888000] swapper/0 R running task 0 1 0 0x00000004 >> [ 38.888000] Backtrace: >> [ 38.888000] [<0000000040200848>] vprintk_emit+0x570/0x5f8 >> [ 38.888000] [<0000000040200bdc>] printk+0x64/0x78 >> [ 38.888000] [<0000000040201fc0>] register_console+0x438/0x550 >> [ 38.888000] [<0000000040688bb8>] uart_add_one_port+0x400/0x5d0 >> [ 38.888000] [<000000004068e6d4>] serial8250_register_8250_port+0x3e4/0x448 >> [ 38.888000] [<0000000040695f44>] pciserial_init_ports+0x22c/0x2c8 >> [ 38.888000] [<0000000040696628>] pciserial_init_one+0x250/0x2e0 >> [ 38.888000] [<00000000405f3880>] pci_device_probe+0xb0/0x150 >> [ 38.888000] [<00000000406a8244>] driver_probe_device+0x204/0x570 >> [ 38.888000] [<00000000406a8728>] __driver_attach+0xe0/0x158 >> [ 38.888000] [<00000000406a4558>] bus_for_each_dev+0xd0/0x128 >> [ 38.888000] [<00000000406a76f8>] driver_attach+0x48/0x60 >> [ 38.888000] [<00000000406a6de8>] bus_add_driver+0x268/0x460 >> [ 38.888000] [<00000000406a915c>] driver_register+0x124/0x1d0 >> [ 38.888000] [<00000000405f336c>] __pci_register_driver+0x64/0x78 >> [ 38.888000] [<00000000401375e4>] serial_pci_driver_init+0x44/0x58 >> >> [ 59.084000] timer_interrupt(CPU 3): delayed! cycles 85EBC4C7D rem 2BAF83 next/now 2765C08677/276594D6F4 >> [ 59.140000] bootconsole [ttyB0] disabled >> [ 59.144000] serial 0000:00:04.1: ttyS1 at MMIO 0xffffffff80000008 (irq = 70, base_baud = 115200) is a 16450 >> [ 59.164000] serial 0000:00:04.1: ttyS2 at MMIO 0xffffffff80000010 (irq = 70, base_baud = 115200) is a 16550A > > I confirm this behaviour on the Mako system as well. In my case, 3.18 > so royally screws up the serial port that even a power cycle won't > recover the console connection to the MP (a sort of parisc equivalent of > a BMC) and I have to go down to the machine room to physically yank the > power from the system to power down the MP and get the console back. > I've added a cc to linux-serial. It looks like there are 20 non merge > commits between 3.17 and 3.18. I'm betting because of the MP problem > it's got to be somewhere in the serial driver: > > cd92208 tty: serial: 8250_mtk: Fix quot calculation > 716e115 serial: 8250_pci: remove rts_n override from Baytrail quirk > 1ede7dc serial: 8250: Add Quark X1000 to 8250_pci.c > 9137568 tty: serial: 8250_core: remove UART_IER_RDI in > serial8250_stop_rx() > 59b3e89 tty: serial: 8250_core: use the ->line argument as a hint in > serial8250_find_match_or_unused() ^^^^^^^^^ This commit would be my first guess, but a complete dmesg up to boot failure would be helpful in narrowing down the problem. There are about 50 ways to initialize the 8250 port (which is part of the problem). Regards, Peter Hurley > 0aa525d tty: serial: 8250_core: read only RX if there is something in > the FIFO > d74d5d1 tty: serial: 8250_core: add run time pm > 234abab tty: serial: 8250_core: allow to set ->throttle / ->unthrottle > callbacks > 2989708 serial: 8250_pci: Add PCI IDs for Intel Braswell > 9a1870c serial: 8250: don't use slave_id of dma_slave_config > b4756f4 tty: serial: 8250: Add Mediatek UART driver > 0b4af1d serial/8250_core: Add reference to uacess.h > b99b121 tty: serial: 8250_core: allow to overwrite & export > serial8250_startup() > ae14a79 tty: serial: 8250_core: provide a function to export > uart_8250_port > 5435d20 serial: 8250: Document serial8250_modem_status() locking > a6eec92 Revert "serial: uart: add hw flow control support configuration" > c10b739 serial: 8250_hp300: trivial: fix symbol name in #warning message > 28e3fb6 serial: Add support for Fintek F81216A LPC to 4 UART > e676253 serial/8250: Add support for RS485 IOCTLs > 91f9d33 module: make it possible to have unsafe, tainting module params > > Bisecting is going to be a pain because of the physical power cycle > problem on a racked system. -- To unsubscribe from this list: send the line "unsubscribe linux-parisc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html