On 01/26/2014 01:02 AM, Jeroen Roovers wrote: > On Sat, 25 Jan 2014 15:13:47 -0500 > John David Anglin <dave.anglin@xxxxxxxx> wrote: > >> Helge has made some changes to palo but I believe that we are on the >> PDC boot >> console (ttyB0) until switch over here: > > This. > >> How long is your cable? There's no shield connection on DB9 >> connector. You just >> need to cross transmit and receive data. Signal ground is straight >> through. >> >> Dave L is correct about USB keyboard and mouse confusing serial >> console support. > > Yes, but _all_ of that is entirely immaterial as the same hardware > worked fine for more than one and a half years, _until_ the changes to > palo/PDC console support were introduced. > > I could easily revert the IPL to the former working version (1.18) and > see if that fixes the issue during boot. I'll report back with some > results. I'm pretty sure that I didn't changed anything in palo which is PDC-console related and which would explain why you have such problems. If there is a problem, then it might be because of kernel and/or cable. Helge -- To unsubscribe from this list: send the line "unsubscribe linux-parisc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
