On 1/25/14 5:02 PM, Jeroen Roovers wrote:
On Sat, 25 Jan 2014 15:13:47 -0500
John David Anglin <dave.anglin@xxxxxxxx> wrote:
Helge has made some changes to palo but I believe that we are on the
PDC boot
console (ttyB0) until switch over here:
This.
How long is your cable? There's no shield connection on DB9
connector. You just
need to cross transmit and receive data. Signal ground is straight
through.
Dave L is correct about USB keyboard and mouse confusing serial
console support.
Yes, but _all_ of that is entirely immaterial as the same hardware
worked fine for more than one and a half years, _until_ the changes to
palo/PDC console support were introduced.
Ahh, I missed that part... :-P I think I set mine up after this was
introduced.
Dave L.
I could easily revert the IPL to the former working version (1.18) and
see if that fixes the issue during boot. I'll report back with some
results.
--
To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Dave Land
Land Computer Service xmechanic@xxxxxxxxxxxx
ICQ: 676030523
--
To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
