Hi, This patch series provide USB host support for the OMAP5 uEVM board. As ethernet port is over USB, it brings up ethernet as well. Series depends on the OMAP clock tree DT data series by Tero Kristo [1] Tested on OMAP5 uEVM and OMAP4 Panda. cheers, -roger [1] - OMAP Clock DT conversion http://www.spinics.net/lists/arm-kernel/msg275311.html Roger Quadros (6): ARM: OMAP5: hwmod data: Add USB Host and TLL modules ARM: dts: OMAP5: Add 60MHz clock reference to USB Host module ARM: dts: omap4-panda: Provide USB PHY clock ARM: dts: omap5-uevm: Provide USB PHY clock Revert "ARM: OMAP2+: Provide alias to USB PHY clock" mfd: omap-usb: prepare/unprepare clock while enable/disable arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-- arch/arm/boot/dts/omap5-uevm.dts | 8 +-- arch/arm/boot/dts/omap5.dtsi | 2 + arch/arm/mach-omap2/board-generic.c | 23 +----- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 135 ++++++++++++++++++++++++++++ drivers/mfd/omap-usb-host.c | 16 ++-- drivers/mfd/omap-usb-tll.c | 4 +- 7 files changed, 152 insertions(+), 44 deletions(-) -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
