Hi, Here is the third round of the OMAP SSI driver patches. Changes since RFCv2: * Move DT data from omap34xx.dtsi to omap3.dtsi Nokia N9 uses an omap3630 and ssi for modem connection, thus SSI seems to be part of all OMAP3 SoCs. * Move DT documentation to the driver patch * Update wording in DT documentation I just applied Stephen Warrens suggestions * Removal of omap_pm_get_dev_context_loss_count as demanded by Tony Lindgren For now there is no context loss support in the driver, since I do not have enough information about the chip to support this via registers. * Dropped useless "default n" from KConfig * Add support for HSI client registration via DT * Register hsi-char as ssi client for Nokia N900 Currently only hsi-char client is available in the mainline kernel, but for the Nokia N900 two more clients will be needed: ssi-protocol and cmt-speech. Those will be added with their own patchset. * Use ida_simple_get for device id, since DT does not setup pd->id * Fixed SSI interrupt numbers in omap3.dtsi I subtracted OMAP_INTC_START before, but the original patch did not yet have OMAP_INTC_START added. * Fixed compilation as kernel modules * Fixed reload of kernel modules * Added module dependency: omap_ssi_port needs omap_port TODO: * Central Message Queue I did not yet implement a central message queue in the HSI framework. I will do this after Nokia N900 modem is working in the mainline kernel, since that makes testing easier. * Get clock data from DT This depends on a patchset, which is not yet part of any kernel tree. Apart from that I don't know which clocks will be needed. That depends on the implementation of the hwmod DTification (see next point) * Remove the hwmod DT hack This depends on some future work merging hwmod data into DT. Version 2 of the patchset: https://lkml.org/lkml/2013/9/15/98 -- Sebastian Sebastian Reichel (7): ARM: OMAP2+: hwmod-data: Add SSI information HSI: add Device Tree support for HSI clients HSI: method to unregister clients from an hsi port HSI: hsi-char: add Device Tree support HSI: hsi-char: fix driver for multiport scenarios ARM: OMAP2+: HSI: Introduce OMAP SSI driver ARM: dts: N900: Add SSI information Documentation/devicetree/bindings/hsi/omap_ssi.txt | 69 + .../devicetree/bindings/hsi/trivial-devices.txt | 36 + arch/arm/boot/dts/omap3-n900.dts | 12 + arch/arm/boot/dts/omap3.dtsi | 47 + arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 48 + drivers/hsi/Kconfig | 1 + drivers/hsi/Makefile | 1 + drivers/hsi/clients/hsi_char.c | 15 +- drivers/hsi/controllers/Kconfig | 19 + drivers/hsi/controllers/Makefile | 6 + drivers/hsi/controllers/omap_ssi.c | 618 +++++++++ drivers/hsi/controllers/omap_ssi.h | 166 +++ drivers/hsi/controllers/omap_ssi_port.c | 1400 ++++++++++++++++++++ drivers/hsi/controllers/omap_ssi_regs.h | 171 +++ drivers/hsi/hsi.c | 80 +- include/dt-bindings/hsi/hsi.h | 17 + include/linux/hsi/hsi.h | 3 + 17 files changed, 2707 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/hsi/omap_ssi.txt create mode 100644 Documentation/devicetree/bindings/hsi/trivial-devices.txt create mode 100644 drivers/hsi/controllers/Kconfig create mode 100644 drivers/hsi/controllers/Makefile create mode 100644 drivers/hsi/controllers/omap_ssi.c create mode 100644 drivers/hsi/controllers/omap_ssi.h create mode 100644 drivers/hsi/controllers/omap_ssi_port.c create mode 100644 drivers/hsi/controllers/omap_ssi_regs.h create mode 100644 include/dt-bindings/hsi/hsi.h -- 1.8.4.rc3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
