Re: [PATCH 0/9] ARM: dts: omap5-uevm: fixup wrong regulator configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/29/2013 08:39 AM, Benoit Cousson wrote:
Hi Nishanth,

On 29/07/2013 15:17, Nishanth Menon wrote:
On 07/29/2013 04:57 AM, Keerthy wrote:
Hi Nishanth,

On Wednesday 17 July 2013 10:15 PM, Nishanth Menon wrote:
Due to wrong older revision of documentation used as reference, we
seem to have a bunch of LDOs wrongly configured on OMAP5 uEVM. This
series is based power tree on production board 750-2628-XXX platform.
Unfortunately, the wrong voltages may be detrimental to OMAP5 as they
supply hardware blocks at voltages that are out of specification.

This series looks good to me.

Acked-by:  J Keerthy <j-keerthy@xxxxxx>

Tony, Benoit - this series could prevent OMAP5 from being damaged on
uEVMs with current 3.11 rc - could you suggest what we need to do to
get it in?

I'm still on vacation with no way to pull any patch... but I can still
comment on the series quickly.

Thanks for responding while on vacation.


It seems to me that this series contains some real fixes that might
damage the board due to hihest voltage than expected and some which are
just improvement like for the SMPS9 or LDO[28]. In theory they should no
go necesseraly to -rc, but, I guess that's fine for that one.

All the "fixes" are sharing more than 50% of the changelog content with
only 2 changes in the code, so you'd better squash them into one patch
to avoid repeating the same thing again and again.

Reason for keeping them separate was to allow any future git bisect to narrow down to precise patch.
<--->
 ARM: dts: omap5-uevm: update SMPS9 settings
  ARM: dts: omap5-uevm: update and disable unused regulators LDO[28]
  ARM: dts: omap5-uevm: update LDO1 voltage to 1.5V and settings
  ARM: dts: omap5-uevm: update LDO3 voltage to 1.5V and settings
  ARM: dts: omap5-uevm: update LDO4 voltage to 1.5V and settings
  ARM: dts: omap5-uevm: update LDO6 voltage to 1.2V
  ARM: dts: omap5-uevm: update LDO7 voltage to 2V and settings
  ARM: dts: omap5-uevm: update SDCARD LDO9 and resource REGEN3
<---->

Would you have suggestions on what to squash up?


--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux