On 07/16/2013 12:51 AM, Felipe Balbi wrote: > On Mon, Jul 15, 2013 at 09:09:02PM +0530, Kishon Vijay Abraham I wrote: >> Modified dwc3-omap to receive connect and disconnect notification using >> extcon framework. Also did the necessary cleanups required after >> adapting to extcon framework. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> >> Acked-by: Felipe Balbi <balbi@xxxxxx> >> Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> >> --- >> This patch should be applied after all of the extcon patchset will be applied >> because this patch has dependency of extcon patch related to DT. >> http://goo.gl/Tu3qW >> >> Changes from v5: >> * rebased to 3.11-rc1 >> Changes from v4: >> * checked the return values of extcon_register_interest and print an error >> message. Note that I dint do return since there might be cases where >> one of USB (device mode) or USB-HOST (host mode) might succeed. >> * Added depends on of EXTCON in usb_dwc3. Only some platforms might >> be using EXTCON, but inorder to avoid compilation errors, added >> depends on >> Changes from v3: >> * did #include of of_extcon.h after Chanwoo resent the patch separating >> extcon-class.c from of_extcon.c >> Changes from v2: >> * updated the Documentation with dwc3 dt binding information. >> * used of_extcon_get_extcon_dev to get extcon device from device tree data. >> Changes from v1: >> * regulator enable/disable is now done here instead of palmas-usb as some users >> of palmas-usb wont need regulator. >> Documentation/devicetree/bindings/usb/omap-usb.txt | 5 + >> drivers/usb/dwc3/Kconfig | 1 + >> drivers/usb/dwc3/dwc3-omap.c | 125 +++++++++++++++++--- >> 3 files changed, 112 insertions(+), 19 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt >> index 57e71f6..9088ab0 100644 >> --- a/Documentation/devicetree/bindings/usb/omap-usb.txt >> +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt >> @@ -53,6 +53,11 @@ OMAP DWC3 GLUE >> It should be set to "1" for HW mode and "2" for SW mode. >> - ranges: the child address space are mapped 1:1 onto the parent address space >> >> +Optional Properties: >> + - extcon : phandle for the extcon device omap dwc3 uses to detect >> + connect/disconnect events. >> + - vbus-supply : phandle to the regulator device tree node if needed. >> + >> Sub-nodes: >> The dwc3 core should be added as subnode to omap dwc3 glue. >> - dwc3 : >> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig >> index 757aa18..08a9fab 100644 >> --- a/drivers/usb/dwc3/Kconfig >> +++ b/drivers/usb/dwc3/Kconfig >> @@ -1,6 +1,7 @@ >> config USB_DWC3 >> tristate "DesignWare USB3 DRD Core Support" >> depends on (USB || USB_GADGET) && GENERIC_HARDIRQS >> + depends on EXTCON > > can you rebase this on top of 'testing' branch. I have a patch there > which give glue layers their own Kconfig symbols. If you do that, I can > queue this patch myself for v3.12, unless we have dependencies on other > patches which aren't in mainline, in which case, I'd ask to simply > remove this Kconfig change for now. > Dear Felipe and Kishon, We have some confusion about applying this patch. I already applied this patch on extcon-next branch for v3.12. This patch has the dependency on below extcon patch. [PATCH] usb: dwc3: use extcon fwrk to receive connect/disconnect - http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=68517aac722c8c3e0c153b3ede40aace25cb66fa [PATCH] extcon: Add an API to get extcon device from dt node - http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=cb28faede03de7abe82336c3648771a01f5fe225 If Felipe would apply this patch usb.git for v3.12, I think you should include extcon patch together. [PATCH] extcon: Add an API to get extcon device from dt node - http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=cb28faede03de7abe82336c3648771a01f5fe225 The dependency related to patch cause this confusion. What is your opinion? Thanks, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
