Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/07/13 13:42, Mark Jackson wrote:
> On 18/01/13 05:14, Mugunthan V N wrote:
>> On 1/18/2013 3:48 AM, Peter Korsgaard wrote:
>>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old
>>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot
>>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the
>>> CPSW slaves, causing the driver to use a random hwaddr, which is some times
>>> troublesome.
>>>
>>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes
>>> more sense to default to these rather than random ones. Add a fixup step
>>> which adds mac-address dt properties using the efuse addresses if the DTB
>>> didn't contain valid ones.
>>>
>>> Signed-off-by: Peter Korsgaard <jacmet@xxxxxxxxxx>
>>>
>>
>> This implementation looks fine.
>> Acked-by: Mugunthan V N <mugunthanvnm@xxxxxx>
> 
> Tested-by: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>

Is this ever going to be put into the mainline code ?
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux