Re: [PATCH 1/2] Revert "ARM: OMAP2+: Fix serial init for device tree based booting"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Rajendra Nayak <rnayak@xxxxxx> [130712 05:18]:
> On Friday 12 July 2013 02:48 PM, Tony Lindgren wrote:
> > * Rajendra Nayak <rnayak@xxxxxx> [130712 02:06]:
> >> On Friday 12 July 2013 01:33 PM, Tony Lindgren wrote:
> >>>
> >>> OK, so that's only for earlyprintk then?
> >>
> >> yes,
> >>
> >>>
> >>> If so, it seems the right fix is to set the NO_IDLE and NO_RESET
> >>> flags based on ifdef CONFIG_DEBUG_OMAP4UART3 etc as that is selected
> >>> in the Kconfig now.
> >>
> >> ok makes sense. It seems like the static data in hwmod can be populated
> >> based on these defines? something like
> >>
> >> /* uart3 */
> >> static struct omap_hwmod omap44xx_uart3_hwmod = {
> >>         .name           = "uart3",
> >>         .class          = &omap44xx_uart_hwmod_class,
> >>         .clkdm_name     = "l4_per_clkdm",
> >> #ifdef CONFIG_DEBUG_OMAP4UART3
> >>         .flags          = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
> >>                                 HWMOD_SWSUP_SIDLE_ACT,
> >> #else
> >>         .flags          = HWMOD_SWSUP_SIDLE_ACT,
> >> #endif
> >>         .main_clk       = "func_48m_fclk",
> >>         .prcm = {
> >>                 .omap4 = {
> >>                         .clkctrl_offs = OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET,
> >>                         .context_offs = OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET,
> >>                         .modulemode   = MODULEMODE_SWCTRL,
> >>                 },
> >>         },
> >> };
> >>
> >> And same way for others? That way the cmdline parsing can be done away
> >> with even for the non-DT case.
> > 
> > Yes we can do it that way. How about add a common macro for it if
> > it's always the same? Then the .flags line would be just:
> > 
> > #define HWMOD_OMAP_UART_FLAGS(soc, port)
> > ...
> > 
> > 	.flags		= HWMOD_OMAP_UART_FLAGS(4, 3),
> 
> I started doing this and ended up with equal number of #ifdefs in the
> header :( Was the intention of doing this to reduce the #ifdefs? in which
> case maybe I am doing something wrong.

Hmm can't you use ## for substition in the macro to reduce the ifdefs
and have just one macro instead one for every debug port?

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux