* Rajendra Nayak <rnayak@xxxxxx> [130712 00:39]: > On Friday 12 July 2013 12:52 PM, Tony Lindgren wrote: > > * Rajendra Nayak <rnayak@xxxxxx> [130711 03:59]: > >> This series should fix the issue with the early serial crash seen > >> during hwmod _setup() as reported by [1] > >> > >> The issue was reported on a am33xx device and was not seen on omap4 > >> or omap5 devices as the hwmod data for both omap4 and omap5 had > >> statically defined HWMOD_INIT_NO_IDLE and HWMOD_INIT_NO_RESET for > >> uart3 which happens to be the debug console used on omap4 panda and > >> omap5 uevm boards. > > > > The serial driver should be capable of setting this on it's own > > as it sets up the console. > > These flags are used to avoid an early reset that hwmod does to all devices > on the SoC and is done much before serial driver is initialized. OK so that's only needed for earlycon then it seems. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
