Define PWM_POLARITY_NORMAL and PWM_POLARITY_INVERTED macros in
include/dt-bindings/pwm/pwm.h to be used by device tree sources.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt | 6 +++---
Documentation/devicetree/bindings/pwm/pwm-samsung.txt | 5 +++--
Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 5 +++--
Documentation/devicetree/bindings/pwm/pwm.txt | 8 +++++---
Documentation/devicetree/bindings/pwm/vt8500-pwm.txt | 5 +++--
arch/arm/boot/dts/am335x-evm.dts | 3 ++-
arch/arm/boot/dts/am335x-evmsk.dts | 3 ++-
arch/arm/boot/dts/wm8850-w70v2.dts | 3 ++-
include/dt-bindings/pwm/pwm.h | 15 +++++++++++++++
include/linux/pwm.h | 4 ++--
10 files changed, 40 insertions(+), 17 deletions(-)
create mode 100644 include/dt-bindings/pwm/pwm.h
diff --git a/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt
index de0eaed..be09be4 100644
--- a/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt
@@ -4,9 +4,9 @@ Required properties:
- compatible: should be "atmel,tcb-pwm"
- #pwm-cells: Should be 3. The first cell specifies the per-chip index
of the PWM to use, the second cell is the period in nanoseconds and
- bit 0 in the third cell is used to encode the polarity of PWM output.
- Set bit 0 of the third cell in PWM specifier to 1 for inverse polarity &
- set to 0 for normal polarity.
+ the third cell is used to encode the polarity of PWM output. Set the
+ PWM_POLARITY_NORMAL flag for normal polarity or the PWM_POLARITY_INVERSED
+ flag for inverted polarity. PWM flags are defined in <dt-bindings/pwm/pwm.h>.
- tc-block: The Timer Counter block to use as a PWM chip.
Example:
diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
index ac67c68..bece18b 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
@@ -24,8 +24,9 @@ Required properties:
- phandle to PWM controller node
- index of PWM channel (from 0 to 4)
- PWM signal period in nanoseconds
- - bitmask of optional PWM flags:
- 0x1 - invert PWM signal
+ - bitmask of optional PWM flags as defined in <dt-bindings/pwm/pwm.h>:
+ PWM_POLARITY_NORMAL - normal polarity
+ PWM_POLARITY_INVERSED - inverted polarity
Optional properties:
- samsung,pwm-outputs: list of PWM channels used as PWM outputs on particular
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index 337c6fc..9007d92 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -7,8 +7,9 @@ Required properties:
- #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
First cell specifies the per-chip index of the PWM to use, the second
cell is the period in nanoseconds and bit 0 in the third cell is used to
- encode the polarity of PWM output. Set bit 0 of the third in PWM specifier
- to 1 for inverse polarity & set to 0 for normal polarity.
+ encode the polarity of PWM output. Set the PWM_POLARITY_NORMAL flag for
+ normal polarity or the PWM_POLARITY_INVERSED flag for inverted polarity.
+ PWM flags are defined in <dt-bindings/pwm/pwm.h>.
- reg: physical base address and size of the registers map.
Optional properties:
diff --git a/Documentation/devicetree/bindings/pwm/pwm.txt b/Documentation/devicetree/bindings/pwm/pwm.txt
index 06e6724..38c357a 100644
--- a/Documentation/devicetree/bindings/pwm/pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm.txt
@@ -43,13 +43,15 @@ because the name "backlight" would be used as fallback anyway.
pwm-specifier typically encodes the chip-relative PWM number and the PWM
period in nanoseconds.
-Optionally, the pwm-specifier can encode a number of flags in a third cell:
-- bit 0: PWM signal polarity (0: normal polarity, 1: inverse polarity)
+Optionally, the pwm-specifier can encode a number of flags (defined in
+<dt-bindings/gpio/gpio.h>) in a third cell:
+- PWM_POLARITY_NORMAL: use the normal PWM signal polarity
+- PWM_POLARITY_INVERSED: invert the PWM signal polarity
Example with optional PWM specifier for inverse polarity
bl: backlight {
- pwms = <&pwm 0 5000000 1>;
+ pwms = <&pwm 0 5000000 PWM_POLARITY_INVERSED>;
pwm-names = "backlight";
};
diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
index d21d82d..5b1b21f 100644
--- a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
@@ -6,8 +6,9 @@ Required properties:
- #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
First cell specifies the per-chip index of the PWM to use, the second
cell is the period in nanoseconds and bit 0 in the third cell is used to
- encode the polarity of PWM output. Set bit 0 of the third in PWM specifier
- to 1 for inverse polarity & set to 0 for normal polarity.
+ encode the polarity of PWM output. Set the PWM_POLARITY_NORMAL flag for
+ normal polarity or the PWM_POLARITY_INVERSED flag for inverted polarity.
+ PWM flags are defined in <dt-bindings/pwm/pwm.h>.
- clocks: phandle to the PWM source clock
Example:
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 3aee1a4..c9da673 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "TI AM335x EVM";
@@ -370,7 +371,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&ecap0 0 50000 0>;
+ pwms = <&ecap0 0 50000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 0c8ad17..5d4ec91 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "TI AM335x EVM-SK";
@@ -298,7 +299,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&ecap2 0 50000 1>;
+ pwms = <&ecap2 0 50000 PWM_POLARITY_INVERSED>;
brightness-levels = <0 58 61 66 75 90 125 170 255>;
default-brightness-level = <8>;
};
diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts
index 90e913f..171930a 100644
--- a/arch/arm/boot/dts/wm8850-w70v2.dts
+++ b/arch/arm/boot/dts/wm8850-w70v2.dts
@@ -11,13 +11,14 @@
/dts-v1/;
/include/ "wm8850.dtsi"
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Wondermedia WM8850-W70v2 Tablet";
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 50000 1>; /* duty inverted */
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERSED>;
brightness-levels = <0 40 60 80 100 130 190 255>;
default-brightness-level = <5>;
diff --git a/include/dt-bindings/pwm/pwm.h b/include/dt-bindings/pwm/pwm.h
new file mode 100644
index 0000000..f82be30
--- /dev/null
+++ b/include/dt-bindings/pwm/pwm.h
@@ -0,0 +1,15 @@
+/*
+ * This header provides constants for most PWM bindings.
+ *
+ * Most PWM bindings can include a flags cell as part of the PWM specifier.
+ * In most cases, the format of the flags cell uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_PWM_PWM_H
+#define _DT_BINDINGS_PWM_PWM_H
+
+#define PWM_POLARITY_NORMAL (0 << 0)
+#define PWM_POLARITY_INVERSED (1 << 0)
+
+#endif
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index f0feafd..ffde99b 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -69,8 +69,8 @@ struct pwm_chip;
* period
*/
enum pwm_polarity {
- PWM_POLARITY_NORMAL,
- PWM_POLARITY_INVERSED,
+ PWM_POLARITY_NORMAL = 0,
+ PWM_POLARITY_INVERSED = 1,
};
enum {
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
