On Mon, Jul 08, 2013 at 07:13:00PM +0530, Sourav Poddar wrote: > Since, qspi controller uses quad read. > > Configuring the command register, if the transfer of data needs > quad lines. > > This patch has been done on top of the following patch[1], which is still > under review/comments. > This patch will also go changes, as the parent patch[1] does. > > [1]: http://comments.gmane.org/gmane.linux.kernel.spi.devel/14047 > > Signed-off-by: Sourav Poddar <sourav.poddar@xxxxxx> > --- > drivers/spi/spi-ti-qspi.c | 8 ++++++-- > 1 files changed, 6 insertions(+), 2 deletions(-) > > diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c > index 430de9c..307cbed 100644 > --- a/drivers/spi/spi-ti-qspi.c > +++ b/drivers/spi/spi-ti-qspi.c > @@ -258,8 +258,12 @@ static int qspi_read_msg(struct dra7xxx_qspi *qspi, struct spi_transfer *t) > qspi->cmd | QSPI_RD_SNGL, qspi->dc); > dra7xxx_writel(qspi, QSPI_WC_INT_EN, QSPI_INTR_ENABLE_SET_REG); > dra7xxx_writel(qspi, qspi->dc, QSPI_SPI_DC_REG); > - dra7xxx_writel(qspi, qspi->cmd | QSPI_RD_SNGL, > - QSPI_SPI_CMD_REG); > + if (t->bitwidth == SPI_BITWIDTH_QUAD) > + dra7xxx_writel(qspi, qspi->cmd | QSPI_RD_QUAD, > + QSPI_SPI_CMD_REG); > + else > + dra7xxx_writel(qspi, qspi->cmd | QSPI_RD_SNGL, > + QSPI_SPI_CMD_REG); we also have read dual, in order to make this code a little better you could: unsigned cmd = qspi->cmd; switch (t->bitwidth) case SPI_BITWIDTH_QUAD: cmd |= QSPI_RD_QUAD; break; case SPI_BITWIDTH_DUAL: cmd |= QSPI_RD_DUAL; break; case SPI_BITWIDTH_SINGLE: default: cmd |= QSPI_RD_SNGL; } dra7xx_writel(qspi, cmd, QSPI_SPI_CMD_REG); -- balbi
Attachment:
signature.asc
Description: Digital signature
