* Tony Lindgren <tony@xxxxxxxxxxx> [130708 04:32]: > * Bedia, Vaibhav <vaibhav.bedia@xxxxxx> [130705 06:37]: > > On Fri, Jul 05, 2013 at 18:50:10, Bedia, Vaibhav wrote: > > > Hi Tony, > > > > > > On Fri, Jul 05, 2013 at 17:29:59, Tony Lindgren wrote: > > > > * Bedia, Vaibhav <vaibhav.bedia@xxxxxx> [130705 01:17]: > > > > > > > > > > I just checked the behavior on my AM335x-EVM. Current mainline boots fine > > > > > provided I don't use earlyprintk. The offending patch [1] in this case is the one > > > > > that tries to get rid of omap_serial_early_init() for DT boot. This change inadvertently > > > > > also results in the console UART getting reset and idled during bootup and that's where > > > > > the boot stops for you. I think if you skip earlyprintk from the bootargs you should see > > > > > the system booting fine. > > > > > > > > > > I guess we need to retain the NO_IDLE and NO_RESET aspect for the console UART in > > > > > omap_serial_early_init() to get earlyprintk working again. > > > > > > > > Hmm nothing should get idled while earlyprintk is running, and then when the > > > > serial driver kicks in it should not idle anything by default. And for DT based > > > > booting we should not have mach-omap2/serial.c initialize anything. > > > > > > > > > > If I add in the HWMOD flags without any reverts I get to the point where the serial driver > > > comes up but the boot eventually stops [1]. Without the flags the boot stops much earlier [2] > > > just like Mark reported. > > > > > > > Err.. the log with HWMOD flags added is [2] and without flags is [1]. Sorry for the confusion. > > It sounds like something needs to be fixed for am33xx as omap3 and omap4 > won't hang with earlyprintk. Almost certainly mach-omap2/serial.c should not > be needed at all for am33xx, and the bug is somewhere else. Oops, sorry correction: I'm seeing it, I did not have console=ttyO earlier in my cmdline. It seems that omap-serial.c console suspends the hardware while earlyprintk is still trying to access it? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
