[PATCH 2/5] usb: phy: phy-omap-control: Add API to power on/off USB PHY for AM335X

[George Cherian <george.cherian@xxxxxx>]

Add API to power on/off USB PHY for AM335X. This API will be called
from phy-amxxxx-usb driver.

Signed-off-by: George Cherian <george.cherian@xxxxxx>
---
 drivers/usb/phy/phy-omap-control.c   | 32 ++++++++++++++++++++++++++++++++
 include/linux/usb/omap_control_usb.h | 11 +++++++++++
 2 files changed, 43 insertions(+)

diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c
index 1419ced..0c1822d 100644
--- a/drivers/usb/phy/phy-omap-control.c
+++ b/drivers/usb/phy/phy-omap-control.c
@@ -46,6 +46,38 @@ struct device *omap_get_control_dev(void)
 EXPORT_SYMBOL_GPL(omap_get_control_dev);
 
 /**
+ * omap_control_am335x_phy_power - power on/off the serializer using control
+ *	module
+ * @dev: the control module device
+ * @on: 0 to off and 1 to on based on powering on or off the PHY
+ * @id: phy id 0 or 1 for phy instance 0 and 1 repectively
+ *
+ * AMXXXX PHY driver should call this API to power on or off the PHY.
+ */
+void omap_control_am335x_phy_power(struct device *dev, bool on, u8 id)
+{
+	u32 val;
+	struct omap_control_usb	*control_usb = dev_get_drvdata(dev);
+
+	if (control_usb->type != OMAP_CTRL_DEV_TYPE3)
+		return;
+
+	val = readl(control_usb->dev_conf + (id * 2));
+
+	if (on) {
+		val &= ~(AM335X_USBPHY_CM_PWRDN | AM335X_USBPHY_OTG_PWRDN);
+		val |= AM335X_USBPHY_OTGVDET_EN |
+			AM335X_USBPHY_OTGSESSEND_EN;
+	} else
+		val |= AM335X_USBPHY_CM_PWRDN | AM335X_USBPHY_OTG_PWRDN;
+
+
+	writel(val, (control_usb->dev_conf + (id * 2)));
+}
+EXPORT_SYMBOL_GPL(omap_control_am335x_phy_power);
+
+
+/**
  * omap_control_usb3_phy_power - power on/off the serializer using control
  *	module
  * @dev: the control module device
diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
index 27b5b8c..11d7a34 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -45,6 +45,7 @@ enum omap_control_usb_mode {
 /* To differentiate ctrl module IP having either mailbox or USB3 PHY power */
 #define	OMAP_CTRL_DEV_TYPE1		0x1
 #define	OMAP_CTRL_DEV_TYPE2		0x2
+#define	OMAP_CTRL_DEV_TYPE3		0x3
 
 #define	OMAP_CTRL_DEV_PHY_PD		BIT(0)
 
@@ -63,10 +64,20 @@ enum omap_control_usb_mode {
 #define	OMAP_CTRL_USB3_PHY_TX_RX_POWERON	0x3
 #define	OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF	0x0
 
+#define AM335X_USBPHY_CM_PWRDN		(1 << 0)
+#define AM335X_USBPHY_OTG_PWRDN		(1 << 1)
+#define AM335X_USBPHY_OTGVDET_EN		(1 << 19)
+#define AM335X_USBPHY_OTGSESSEND_EN	(1 << 20)
+#define AM335X_USB0_WKUP_CTRL_ENABLE	(1 << 0)
+#define AM335X_USB1_WKUP_CTRL_ENABLE	(1 << 8)
+
+
+
 #if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
 extern struct device *omap_get_control_dev(void);
 extern void omap_control_usb_phy_power(struct device *dev, int on);
 extern void omap_control_usb3_phy_power(struct device *dev, bool on);
+extern void omap_control_am335x_phy_power(struct device *dev, bool on, u8 id);
 extern void omap_control_usb_set_mode(struct device *dev,
 	enum omap_control_usb_mode mode);
 #else
-- 
1.8.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html