ehci-omap needs NOP_USB_XCEIV PHY driver to function properly, so select it. As the USB PHY drivers no longer depend on USB_PHY, it is safe to select the PHY drivers. Signed-off-by: Roger Quadros <rogerq@xxxxxx> Tested-by: Adrien Vergé <adrienverge@xxxxxxxxx> --- drivers/usb/host/Kconfig | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 7ded784..48e1b70 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -150,13 +150,11 @@ config USB_EHCI_MXC config USB_EHCI_HCD_OMAP tristate "EHCI support for OMAP3 and later chips" depends on ARCH_OMAP + select NOP_USB_XCEIV default y ---help--- Enables support for the on-chip EHCI controller on OMAP3 and later chips. - If your system uses a PHY on the USB port, you will need to - enable USB_PHY and the appropriate PHY driver as well. Most - boards need the NOP_USB_XCEIV PHY driver. config USB_EHCI_HCD_ORION tristate "Support for Marvell EBU on-chip EHCI USB controller" -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
