Hi Benoit, Thanks for the quick response. ________________________________________ From: Cousson, Benoit Sent: Friday, June 07, 2013 5:57 PM To: J, KEERTHY Cc: devicetree-discuss@xxxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; ldewangan@xxxxxxxxxx; grant.likely@xxxxxxxxxxxx; swarren@xxxxxxxxxxxxx; swarren@xxxxxxxxxx; sameo@xxxxxxxxxxxxxxx; gg@xxxxxxxxxxxxxxx; lee.jones@xxxxxxxxxx Subject: Re: [PATCH] ARM: dts: add dtsi for palmas Hi Keerthy, On 06/07/2013 01:28 PM, J Keerthy wrote: > Adds palmas mfd and palmas regulator nodes. This is > based on the patch series: > > http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg89957.html > > The device tree nodes are based on: > https://lkml.org/lkml/2013/6/6/25 It looks like the board node to use palmas is missing? I cannot find it in the previous series as well? Yes. This is just the palmas.dtsi which will be included in the board file. > > Signed-off-by: J Keerthy <j-keerthy@xxxxxx> > Signed-off-by: Graeme Gregory <gg@xxxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/palmas.dtsi | 171 +++++++++++++++++++++++++++++++++++++++++ > 1 files changed, 171 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/boot/dts/palmas.dtsi > > diff --git a/arch/arm/boot/dts/palmas.dtsi b/arch/arm/boot/dts/palmas.dtsi > new file mode 100644 > index 0000000..be631b5 > --- /dev/null > +++ b/arch/arm/boot/dts/palmas.dtsi > @@ -0,0 +1,171 @@ > +/* > + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <dt-bindings/interrupt-controller/irq.h> > + > +&palmas { > + compatible = "ti,palmas"; > + interrupt-controller; > + #interrupt-cells = <2>; The I2C address should be there as well. We used to put it in the board file, but this is really an I2C device specific information and not board specific in that case. This again i will send another patch on top of the existing board file. That will have the I2C address. This patch only adds the standalone palmas.dtsi. Regards, Keerthy Regards, Benoit > + > + palmas_pmic { > + compatible = "ti,palmas-pmic"; > + interrupt-parent = <&palmas>; > + interrupts = <14 IRQ_TYPE_NONE>; > + interrupt-name = "short-irq"; > + > + ti,ldo6-vibrator; > + > + regulators { > + smps123_reg: smps123 { > + regulator-name = "smps123"; > + regulator-min-microvolt = < 600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + smps45_reg: smps45 { > + regulator-name = "smps45"; > + regulator-min-microvolt = < 600000>; > + regulator-max-microvolt = <1310000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + smps6_reg: smps6 { > + regulator-name = "smps6"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + smps7_reg: smps7 { > + regulator-name = "smps7"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + smps8_reg: smps8 { > + regulator-name = "smps8"; > + regulator-min-microvolt = < 600000>; > + regulator-max-microvolt = <1310000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + smps9_reg: smps9 { > + regulator-name = "smps9"; > + regulator-min-microvolt = <2100000>; > + regulator-max-microvolt = <2100000>; > + regulator-always-on; > + regulator-boot-on; > + ti,smps-range = <0x80>; > + }; > + > + smps10_reg: smps10 { > + regulator-name = "smps10"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo1_reg: ldo1 { > + regulator-name = "ldo1"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo2_reg: ldo2 { > + regulator-name = "ldo2"; > + regulator-min-microvolt = <2900000>; > + regulator-max-microvolt = <2900000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo3_reg: ldo3 { > + regulator-name = "ldo3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo4_reg: ldo4 { > + regulator-name = "ldo4"; > + regulator-min-microvolt = <2200000>; > + regulator-max-microvolt = <2200000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo5_reg: ldo5 { > + regulator-name = "ldo5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo6_reg: ldo6 { > + regulator-name = "ldo6"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo7_reg: ldo7 { > + regulator-name = "ldo7"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo8_reg: ldo8 { > + regulator-name = "ldo8"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo9_reg: ldo9 { > + regulator-name = "ldo9"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldoln_reg: ldoln { > + regulator-name = "ldoln"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldousb_reg: ldousb { > + regulator-name = "ldousb"; > + regulator-min-microvolt = <3250000>; > + regulator-max-microvolt = <3250000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + }; > + }; > +}; > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
