On 6/6/2013 12:36 PM, Florian Vaussard wrote:
Hello,
On 06/05/2013 07:08 PM, Mugunthan V N wrote:
Add pinmux configurations for MII based CPSW ethernet to am335x-bone.
In this patch, only single named mode/state is added and these pins
are configured during pinctrl driver initialization.
Default mode is nothing but the values required for the module during
active state. With this configurations module is functional as
expected.
Todo:
- if an idle state is available for pins, add support for it.
Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx>
---
arch/arm/boot/dts/am335x-bone.dts | 38
+++++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone.dts
b/arch/arm/boot/dts/am335x-bone.dts
index 4b5a8e0..008a13b 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -36,6 +36,33 @@
0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP |
MODE7 */
>;
};
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x110 0x20 /* mii1_rxerr.mii1_rxerr, MODE0 |
INPUT */
Here I guess that the comment should be INPUT_PULLDOWN, instead of INPUT.
Good catch, I will modify this and submit next version today.
+ 0x114 0x0 /* mii1_txen.mii1_txen, MODE0 | OUTPUT */
As bit PULLUDENABLE is 0, the pulldown is enabled according to the
TRM, right?
Is this a desirable behaviour, as it will consume power when
outputting a high level?
This is the desirable behavior.
And consequently, the comment should probably be OUTPUT_PULLDOWN, no?
Will update this in next version of patch series.
Regards
Mugunthan V N
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
