Currently the I2C devices instantiation Method 3 "Probe an I2C bus for
certain devices" (see Documentation/i2c/instantiating-devices) is always
enabled for all platforms (boards) and can't be disabled.
This feature introduces a system boot time delay for boards,
where I2C devices topology is explicitly defined in DT or platform code
(Method 1 and Method 2 are used only) and especially when i2c-gpio is used.
For example:
When CONFIG_SENSORS_LM75 option was enabled for omap4-sdp board -
it introduces 5-6 ms boot delay.
When CONFIG_SENSORS_LM75 option was enabled for omap5-uevm board,
where i2c-gpio is used for HDMI edid reading - it introduces up to 5 sec boot
delay.
Hence, introduce CONFIG_I2C_DISABLE_DEVICE_DETECTION configuration option
to allow disabling of I2C devices instantiation Method 3 "Probe an I2C bus
for certain devices" if it's not needed (usually for embedded systems).
CC: linux-i2c@xxxxxxxxxxxxxxx
CC: linux-kernel@xxxxxxxxxxxxxxx
CC: linux-omap@xxxxxxxxxxxxxxx
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
drivers/i2c/Kconfig | 10 ++++++++++
drivers/i2c/i2c-core.c | 6 ++++++
2 files changed, 16 insertions(+)
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index e380c6e..f7b220b 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -124,4 +124,14 @@ config I2C_DEBUG_BUS
a problem with I2C support and want to see more of what is going
on.
+config I2C_DISABLE_DEVICE_DETECTION
+ bool "I2C Disable device detection"
+ default n
+ help
+ Say Y here, if you have explicitly defined I2C device topology in DT
+ or platform code and don't need to detect presence of supported I2C
+ devices automatically (Documentation/i2c/instantiating-devices -
+ Method 1 and Method 2 are used only). Enabling this option allows to
+ reduce system boot time, especially in case when i2c-gpio driver is used.
+
endif # I2C
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 48e31ed..d5ab7a3 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -54,7 +54,9 @@ static DEFINE_MUTEX(core_lock);
static DEFINE_IDR(i2c_adapter_idr);
static struct device_type i2c_client_type;
+#ifndef CONFIG_I2C_DISABLE_DEVICE_DETECTION
static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
+#endif
/* ------------------------------------------------------------------------- */
@@ -958,7 +960,9 @@ static int i2c_do_add_adapter(struct i2c_driver *driver,
struct i2c_adapter *adap)
{
/* Detect supported devices on that bus, and instantiate them */
+#ifndef CONFIG_I2C_DISABLE_DEVICE_DETECTION
i2c_detect(adap, driver);
+#endif
/* Let legacy drivers scan this bus for matching devices */
if (driver->attach_adapter) {
@@ -1672,6 +1676,7 @@ static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
return err >= 0;
}
+#ifndef CONFIG_I2C_DISABLE_DEVICE_DETECTION
static int i2c_detect_address(struct i2c_client *temp_client,
struct i2c_driver *driver)
{
@@ -1760,6 +1765,7 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
kfree(temp_client);
return err;
}
+#endif
int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr)
{
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
