This is a very incomplete conversion of a handful of OMAP4 PRCM clocks from the statically defined clock data in arch/arm/mach-omap2/cclock44xx_data.c to a new dts file in arch/arm/boot/dts/omap4-clocks.dtsi. I am not a DT expert so many of the choices here may be quite disgusting to look at, or may be on the right path. In particular I simply include the new omap4-clocks.dtsi from omap4.dtsi, which feels a bit kludgey. Also this series depends on the basic clock bindings RFC I posted earlier today[1]. I actually have an omap4-clock.dtsi file with many more clocks converted to the mux-clock, divider-clock, fixed-clock, fixed-factor and (unpublished) gate-clock bindings in my local repo, but it is not currently booting. I wanted to get this early preview out regardless. [1] http://article.gmane.org/gmane.linux.kernel/1501216 Mike Turquette (3): clk: omap: introduce clock driver ARM: dts: omap4 clock data ARM: omap4: register DT clocks & remove old data arch/arm/boot/dts/omap4-clocks.dtsi | 128 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap4.dtsi | 2 + arch/arm/mach-omap2/cclock44xx_data.c | 54 ++------------ drivers/clk/Makefile | 1 + drivers/clk/omap/Makefile | 1 + drivers/clk/omap/clk.c | 55 +++++++++++++++ include/linux/clk/omap.h | 24 +++++++ 7 files changed, 217 insertions(+), 48 deletions(-) create mode 100644 arch/arm/boot/dts/omap4-clocks.dtsi create mode 100644 drivers/clk/omap/Makefile create mode 100644 drivers/clk/omap/clk.c create mode 100644 include/linux/clk/omap.h -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
