This patch adds support for RGMII TX delay configuration on Atheros 803X,
this can be enabled in debug registers. With this patch,
PHY_INTERFACE_MODE_RGMII_TXID modes are now supported.
Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx>
---
drivers/net/phy/at803x.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 63444b7..dda07ed 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -27,6 +27,10 @@
#define AT803X_MMD_ACCESS_CONTROL 0x0D
#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
#define AT803X_FUNC_DATA 0x4003
+#define AT803X_DEBUG_ADDR 0x1D
+#define AT803X_DEBUG_DATA 0x1E
+#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
+#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
MODULE_DESCRIPTION("Atheros 803x PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
@@ -99,6 +103,7 @@ static void at803x_get_wol(struct phy_device *phydev,
static int at803x_config_init(struct phy_device *phydev)
{
int val;
+ int ret;
u32 features;
features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI |
@@ -133,6 +138,17 @@ static int at803x_config_init(struct phy_device *phydev)
phydev->supported = features;
phydev->advertising = features;
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ ret = phy_write(phydev, AT803X_DEBUG_ADDR,
+ AT803X_DEBUG_SYSTEM_MODE_CTRL);
+ if (ret)
+ return ret;
+ ret = phy_write(phydev, AT803X_DEBUG_DATA,
+ AT803X_DEBUG_RGMII_TX_CLK_DLY);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
