On most OMAP3 platforms, the twl4030 IRQ line is connected to the
SYS_NIRQ line on OMAP. Therefore, configure the defaults for the
SYS_NIRQ pin in the twl4030 DTS file.
Boards that hook up the twl4030 differently can easily override this
in their board-specific DTS file.
This allows RTC wake from off-mode to work again on OMAP3-based
platforms with twl4030. Tested on 3530/Beagle, 3730/Beagle-xM,
3530/Overo, 3730/Overo-STORM.
Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxx>
---
arch/arm/boot/dts/twl4030.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index b3034da..c7fe9f6 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -13,6 +13,8 @@
compatible = "ti,twl4030";
interrupt-controller;
#interrupt-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl4030_pins>;
rtc {
compatible = "ti,twl4030-rtc";
@@ -92,3 +94,18 @@
#pwm-cells = <2>;
};
};
+
+&omap3_pmx_core {
+ /*
+ * On most OMAP3 platforms, the twl4030 IRQ line is connected
+ * to the SYS_NIRQ line on OMAP. Therefore, configure the
+ * defaults for the SYS_NIRQ pin here. Boards that hook up
+ * the twl4030 differently can easily override this in their
+ * board-specific DTS file.
+ */
+ twl4030_pins: pinmux_twl4030_pins {
+ pinctrl-single,pins = <
+ 0x1b0 0x4118 /* sys_nirq.sys_nirq WAKEUP | INPUT_PULLUP | MODE 0 */
+ >;
+ };
+};
--
1.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
