Use standard GPIO constants to enhance the readability of DT GPIOs.
Signed-off-by: Florian Vaussard <florian.vaussard@xxxxxxx>
---
arch/arm/boot/dts/am335x-bone.dts | 8 ++++----
arch/arm/boot/dts/am335x-evm.dts | 14 +++++++-------
arch/arm/boot/dts/am335x-evmsk.dts | 16 ++++++++--------
arch/arm/boot/dts/am33xx.dtsi | 2 ++
4 files changed, 21 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 0365e56..5bfb7dd 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -88,27 +88,27 @@
led@2 {
label = "beaglebone:green:heartbeat";
- gpios = <&gpio1 21 0>;
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@3 {
label = "beaglebone:green:mmc0";
- gpios = <&gpio1 22 0>;
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
label = "beaglebone:green:usr2";
- gpios = <&gpio1 23 0>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@5 {
label = "beaglebone:green:usr3";
- gpios = <&gpio1 24 0>;
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 629476e..0fbecfd 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -159,12 +159,12 @@
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
- row-gpios = <&gpio1 25 0 /* Bank1, pin25 */
- &gpio1 26 0 /* Bank1, pin26 */
- &gpio1 27 0>; /* Bank1, pin27 */
+ row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH /* Bank1, pin25 */
+ &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */
+ &gpio1 27 GPIO_ACTIVE_HIGH>; /* Bank1, pin27 */
- col-gpios = <&gpio1 21 0 /* Bank1, pin21 */
- &gpio1 22 0>; /* Bank1, pin22 */
+ col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH /* Bank1, pin21 */
+ &gpio1 22 GPIO_ACTIVE_HIGH>; /* Bank1, pin22 */
linux,keymap = <0x0000008b /* MENU */
0x0100009e /* BACK */
@@ -183,14 +183,14 @@
switch@9 {
label = "volume-up";
linux,code = <115>;
- gpios = <&gpio0 2 1>;
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
gpio-key,wakeup;
};
switch@10 {
label = "volume-down";
linux,code = <114>;
- gpios = <&gpio0 3 1>;
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
gpio-key,wakeup;
};
};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index a339a76..289ba2c 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -144,26 +144,26 @@
led@1 {
label = "evmsk:green:usr0";
- gpios = <&gpio1 4 0>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@2 {
label = "evmsk:green:usr1";
- gpios = <&gpio1 5 0>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@3 {
label = "evmsk:green:mmc0";
- gpios = <&gpio1 6 0>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
label = "evmsk:green:heartbeat";
- gpios = <&gpio1 7 0>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
@@ -177,26 +177,26 @@
switch@1 {
label = "button0";
linux,code = <0x100>;
- gpios = <&gpio2 3 0>;
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
};
switch@2 {
label = "button1";
linux,code = <0x101>;
- gpios = <&gpio2 2 0>;
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
};
switch@3 {
label = "button2";
linux,code = <0x102>;
- gpios = <&gpio0 30 0>;
+ gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
gpio-key,wakeup;
};
switch@4 {
label = "button3";
linux,code = <0x103>;
- gpios = <&gpio2 5 0>;
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 016c460..f116c79 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -8,6 +8,8 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/gpio/gpio.h>
+
#include "skeleton.dtsi"
/ {
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
