On Tue, Apr 9, 2013 at 4:45 AM, Rob Herring <robherring2@xxxxxxxxx> wrote: > On 04/08/2013 05:56 PM, Javier Martinez Canillas wrote: >> On 04/09/2013 12:16 AM, Stephen Warren wrote: >>> On 04/08/2013 04:05 PM, Rob Herring wrote: >>>> On 04/05/2013 02:48 AM, Javier Martinez Canillas wrote: >>>>> According to Documentation/devicetree/bindings/interrupt-controller/interrupts.txt >>>>> the "#interrupt-cells" property of an "interrupt-controller" is used >>>>> to define the number of cells needed to specify a single interrupt. >>> ... >>>>> But the type is never returned so it can't be saved on the IRQ struct >>>>> resource flags member. >>>>> >>>>> This means that drivers that need the IRQ type/level flags defined in >>>>> the DT won't be able to get it. >>>> >>>> But the interrupt controllers that need the information should be able >>>> to get to it via irqd_get_trigger_type. What problem exactly are you >>>> trying to fix? What driver would use this? >>> >>> FYI, that is indeed what I did in sound/soc/codecs/wm8903.c. Thinking >>> back, I'm not sure if that was the right thing or whether I should have >>> sent this same patch:-) >>> >> >> Hi Stephen, >> >> I'm glad you agree :-) >> >> I could change drivers/net/ethernet/smsc/smsc911x.c to get the type flags for >> the IRQ with irqd_get_trigger_type() but I prefer $subject because: > > irqd_get_trigger_type probably is not meant for outside of irqchips. > Creating an irq_get_irq_type function which takes an irq number would be > the right function as that does not expose struct irq_data. > Ok, I can add an irqd_get_trigger_type() that just return the flags to the caller without exposing the struct irq_data and using it on the SMSC 911x driver instead using struct resource *irq_res->flags I hope networking folks understand why this change is needed in this driver to get the type/level flags for an IRQ defined on a DT... >> a) This works in the non-DT case with board files and filling the resources from >> platform data in arch/arm/mach-omap2/gpmc-smsc911x.c. So this is definitely a >> bug on the DT core. > > And hackery/abuse like this: > > arch/arm/mach-omap2/board-3630sdp.c:32: .flags = > GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL, > >> b) I don't see why of_irq_to_resource() should discard the type/level flags when >> filling the IORESOURCE_IRQ if it was specified on the DT. >> >> c) We will have to change all drivers that expect to get the IRQ type flags from >> a IORESOURCE_IRQ struct resource. > > I'm not convinced that is a high number of drivers. Nearly all the > occurrences of IORESOURCE_IRQ_ in drivers/ are for ISA (acpi/pnp) and > drivers for ISA devices. > If IORESOURCE_IRQ is just supposed to be used for ISA devices drivers that use ACPI/PnP instead DT, then of_irq_to_resource() callers should just use irq_of_parse_and_map() that returns the virtual IRQ number for an index within a controller instead of a struct resource. In fact I wonder what's the point to have an of_irq_to_resource() function at all if IORESOURCE_IRQ is not supposed to be used for devices connected through dumb buses that need a DT and the struct resource will only hold the mapped virtual IRQ number and no the IRQ flags. > Rob > Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html