On Thursday 28 March 2013 02:20 AM, Santosh Shilimkar wrote:
> On Thursday 28 March 2013 01:24 AM, Kevin Hilman wrote:
>> Santosh Shilimkar <santosh.shilimkar@xxxxxx> writes:
>>
>>> On Thursday 28 March 2013 12:15 AM, Kevin Hilman wrote:
>>>> Santosh Shilimkar <santosh.shilimkar@xxxxxx> writes:
>>>>
>>>>> Move the secondary CPU wakeup prepare code under smp_prepare_cpus().
>>>>
>>>> Why?
>>>>
>>> Because that code belongs to smp_prepare_cpus(). As I said
>>> in earlier patches, it was remainder of the pen release code
>>> which was borrowed from ARM code initially.
>>
>> Sure, but that should be in the changelog.
>>
> Yep. Will add above info in changelog.
>
For record, patch with updated changelog end of email.
Regards,
Santosh
>From b699ddd19bf3542d43ffe293c6148161e160b1bc Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Date: Sun, 10 Feb 2013 13:54:00 +0530
Subject: [PATCH v2 7/9] ARM: OMAP4+: Move the CPU wakeup prepare code under
smp_prepare_cpus()
Move the secondary CPU wakeup prepare code under smp_prepare_cpus() where it
belongs. It was remainder of the pen release code which was borrowed from
ARM code initially.
While at it drop the un-necessary sev() and barrier which was under
prepare code.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
---
arch/arm/mach-omap2/omap-smp.c | 51 ++++++++++++++++------------------------
1 file changed, 20 insertions(+), 31 deletions(-)
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 1e14899..0cbb677 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -164,36 +164,6 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
return 0;
}
-static void __init wakeup_secondary(void)
-{
- void *startup_addr = omap_secondary_startup;
- void __iomem *base = omap_get_wakeupgen_base();
-
- if (cpu_is_omap446x()) {
- startup_addr = omap_secondary_startup_4460;
- pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
- }
-
- /*
- * Write the address of secondary startup routine into the
- * AuxCoreBoot1 where ROM code will jump and start executing
- * on secondary core once out of WFE
- * A barrier is added to ensure that write buffer is drained
- */
- if (omap_secure_apis_support())
- omap_auxcoreboot_addr(virt_to_phys(startup_addr));
- else
- __raw_writel(virt_to_phys(omap5_secondary_startup),
- base + OMAP_AUX_CORE_BOOT_1);
-
- /*
- * Send a 'sev' to wake the secondary core from WFE.
- * Drain the outstanding writes to memory
- */
- dsb_sev();
- mb();
-}
-
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
@@ -229,6 +199,8 @@ static void __init omap4_smp_init_cpus(void)
static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
{
+ void *startup_addr = omap_secondary_startup;
+ void __iomem *base = omap_get_wakeupgen_base();
/*
* Initialise the SCU and wake up the secondary core using
@@ -236,7 +208,24 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
*/
if (scu_base)
scu_enable(scu_base);
- wakeup_secondary();
+
+ if (cpu_is_omap446x()) {
+ startup_addr = omap_secondary_startup_4460;
+ pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
+ }
+
+ /*
+ * Write the address of secondary startup routine into the
+ * AuxCoreBoot1 where ROM code will jump and start executing
+ * on secondary core once out of WFE
+ * A barrier is added to ensure that write buffer is drained
+ */
+ if (omap_secure_apis_support())
+ omap_auxcoreboot_addr(virt_to_phys(startup_addr));
+ else
+ __raw_writel(virt_to_phys(omap5_secondary_startup),
+ base + OMAP_AUX_CORE_BOOT_1);
+
}
struct smp_operations omap4_smp_ops __initdata = {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
