Move the secondary CPU wakeup prepare code under smp_prepare_cpus(). While at
it drop the un-necessary sev() and barrier which was under prepare code.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
---
arch/arm/mach-omap2/omap-smp.c | 51 ++++++++++++++++------------------------
1 file changed, 20 insertions(+), 31 deletions(-)
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 7d29a74..9711ecd 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -164,36 +164,6 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
return 0;
}
-static void __init wakeup_secondary(void)
-{
- void *startup_addr = omap_secondary_startup;
- void __iomem *base = omap_get_wakeupgen_base();
-
- if (cpu_is_omap446x()) {
- startup_addr = omap_secondary_startup_4460;
- pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
- }
-
- /*
- * Write the address of secondary startup routine into the
- * AuxCoreBoot1 where ROM code will jump and start executing
- * on secondary core once out of WFE
- * A barrier is added to ensure that write buffer is drained
- */
- if (omap_secure_apis_support())
- omap_auxcoreboot_addr(virt_to_phys(startup_addr));
- else
- __raw_writel(virt_to_phys(omap5_secondary_startup),
- base + OMAP_AUX_CORE_BOOT_1);
-
- /*
- * Send a 'sev' to wake the secondary core from WFE.
- * Drain the outstanding writes to memory
- */
- dsb_sev();
- mb();
-}
-
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
@@ -231,6 +201,8 @@ static void __init omap4_smp_init_cpus(void)
static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
{
+ void *startup_addr = omap_secondary_startup;
+ void __iomem *base = omap_get_wakeupgen_base();
/*
* Initialise the SCU and wake up the secondary core using
@@ -238,7 +210,24 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
*/
if (scu_base)
scu_enable(scu_base);
- wakeup_secondary();
+
+ if (cpu_is_omap446x()) {
+ startup_addr = omap_secondary_startup_4460;
+ pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
+ }
+
+ /*
+ * Write the address of secondary startup routine into the
+ * AuxCoreBoot1 where ROM code will jump and start executing
+ * on secondary core once out of WFE
+ * A barrier is added to ensure that write buffer is drained
+ */
+ if (omap_secure_apis_support())
+ omap_auxcoreboot_addr(virt_to_phys(startup_addr));
+ else
+ __raw_writel(virt_to_phys(omap5_secondary_startup),
+ base + OMAP_AUX_CORE_BOOT_1);
+
}
struct smp_operations omap4_smp_ops __initdata = {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
