On Fri, Mar 1, 2013 at 6:22 PM, Jon Hunter <jon-hunter@xxxxxx> wrote: > Summary of updates: > - Convert OMAP GPIO driver to use linear mapping for IRQ domains > - Avoid crashes seen if a gpio bank is not enabled when requesting an IRQ. > > Testing includes: > - Boot testing on OMAP5912 OSK, OMAP2420 H4, OMAP3430 SDP, OMAP4430 SDP > and AM335x EVM. > - Verified that GPIO interrupts are working on OMAP5912 OSK, OMAP2420 H4, > OMAP3430 SDP and OMAP4430 SDP by making sure networking was working > correctly as these boards use a GPIO with the ethernet chips. Also > checked /proc/interrupts to ensure GPIO interrupt counts are > incrementing as expected. > > Jon Hunter (2): > gpio/omap: convert gpio irq domain to linear mapping > gpio/omap: warn if bank is not enabled on setting irq type > > drivers/gpio/gpio-omap.c | 75 +++++++++++++++++++++------------------------- > 1 file changed, 34 insertions(+), 41 deletions(-) > > -- I've tested on a TI OMAP3 DM3735 board (IGEPv2) and the ethernet chip (which use a GPIO line as a IRQ) is working correctly too. So, for both patches: Tested-by: Javier Martinez Canillas <javier@xxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
