Before I dig any deeper, can anyone tell me if the bootarg "mpurate" is meant to be supported for AM335x SoCs ? I've tried it on our custom board using 3v8, but no joy. The boot log shows:- [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.8.0-03059-g621553c-dirty (mpfj@mpfj-nanobone) (gcc version 4.5.4 (Buildroot 2012.11) ) #113 SMP Thu Feb 21 16:29:48 GMT 2013 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: Newflow NanoBone [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES1.0 (neon ) ... [ 0.000000] Kernel command line: console=ttyO0,115200n8 mpurate=720 root=/dev/mmcblk0p2 ro rootfstype=ext2 rootwait ... [ 0.001119] Calibrating delay loop... 364.48 BogoMIPS (lpj=1425408) I have seen other boot logs outputs [1] from other people where they are getting nearly double that. Looking at omap2xxx_clk_arch_init(), only ompa24xx devices are supported. Am I missing something obvious (like it's not yet supported !!) ? Cheers Mark J. [1] http://e2e.ti.com/support/embedded/linux/f/354/t/245316.aspx -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
