On Thu, Feb 07, 2013 at 04:02:47PM +0000, Roger Quadros wrote: > Allows the OHCI controller found in OMAP3 and later chips to > be specified via device tree. > > Signed-off-by: Roger Quadros <rogerq@xxxxxx> > Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> > --- > .../devicetree/bindings/usb/omap3-ohci.txt | 17 +++++++++++++++++ > drivers/usb/host/ohci-omap3.c | 19 +++++++++++++++++++ > 2 files changed, 36 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/usb/omap3-ohci.txt > > diff --git a/Documentation/devicetree/bindings/usb/omap3-ohci.txt b/Documentation/devicetree/bindings/usb/omap3-ohci.txt > new file mode 100644 > index 0000000..ad2ace0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/omap3-ohci.txt > @@ -0,0 +1,17 @@ > +OMAP HS USB OHCI controller (OMAP3 and later) > + > +Required properties: > + > +- compatible: should be "ti,ohci-omap3" > +- reg: should contain one register range i.e. start and length > +- interrupt-parent: phandle to the interrupt controller I'm not sure that needs to be documented as a required property. It's a standard property, and if it's defined for the parent node, you won't need it here. Otherwise, this looks fine to me. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html