Hi Vaibhav, On Fri, 8 Feb 2013, Hiremath, Vaibhav wrote: > Sorry for not following up on this for long, I have tested v3.8-rc6 > (with latest u-boot)on both BeageBone platoforms and I have pasted the logs > below as well for reference. > > > Paul, > I have used your MLO & u-boot.img images and tried at my end, and as > expected it didn't boot for me. I debugged it further and found that your > u-boot doesn't enable support for FDT and that's is the reason it fails to > boot. This MLO & u-boot.img is the one that TI originally shipped on the BeagleBone that I received, and it worked fine with an appended DTB on v3.7-rc8: http://www.pwsan.com/omap/testlogs/test_v3.7-rc8/20121204220128/boot/am335xbone/am335xbone_log.txt So what I'd like to know is why it doesn't work with >= v3.8-rc1 with an appended DTB: http://www.pwsan.com/omap/testlogs/test_v3.8-rc1/20121228031713/boot/am335xbone/am335xbone_log.txt The point is to try to minimize bootloader dependencies. Haven't had the chance to try Felipe's suggestion yet re fdt_high. Also, this is using BeagleBone whites here. - Paul -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
