On 02/05/2013 09:26 AM, Felipe Balbi wrote:
> Hi,
>
> On Mon, Feb 04, 2013 at 05:58:48PM +0200, Roger Quadros wrote:
>> The PHY clock, clock rate, VCC regulator and RESET regulator
>> can now be provided via device tree.
>>
>> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
>> ---
>> .../devicetree/bindings/usb/usb-nop-xceiv.txt | 34 ++++++++++++++++++++
>> drivers/usb/otg/nop-usb-xceiv.c | 31 ++++++++++++++++++
>> 2 files changed, 65 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
>>
>> diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
>> new file mode 100644
>> index 0000000..d7e2726
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
>> @@ -0,0 +1,34 @@
>> +USB NOP PHY
>> +
>> +Required properties:
>> +- compatible: should be usb-nop-xceiv
>> +
>> +Optional properties:
>> +- clocks: phandle to the PHY clock. Use as per Documentation/devicetree
>> + /bindings/clock/clock-bindings.txt
>> + This property is required if clock-frequency is specified.
>> +
>> +- clock-names: Should be "main_clk"
>> +
>> +- clock-frequency: the clock frequency (in Hz) that the PHY clock must
>> + be configured to.
>> +
>> +- vcc-supply: phandle to the regulator that provides RESET to the PHY.
>> +
>> +- reset-supply: phandle to the regulator that provides power to the PHY.
>> +
>> +Example:
>> +
>> + hsusb1_phy {
>> + compatible = "usb-nop-xceiv";
>> + clock-frequency = <19200000>;
>> + clocks = <&osc 0>;
>> + clock-names = "main_clk";
>> + vcc-supply = <&hsusb1_vcc_regulator>;
>> + reset-supply = <&hsusb1_reset_regulator>;
>> + };
>> +
>> +hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
>> +and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
>> +hsusb1_vcc_regulator provides power to the PHY and hsusb1_reset_regulator
>> +controls RESET.
>> diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
>> index ac027a1..adbb7ab 100644
>> --- a/drivers/usb/otg/nop-usb-xceiv.c
>> +++ b/drivers/usb/otg/nop-usb-xceiv.c
>> @@ -34,6 +34,7 @@
>> #include <linux/slab.h>
>> #include <linux/clk.h>
>> #include <linux/regulator/consumer.h>
>> +#include <linux/of.h>
>>
>> struct nop_usb_xceiv {
>> struct usb_phy phy;
>> @@ -138,8 +139,19 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
>> return 0;
>> }
>>
>> +static void nop_xeiv_get_dt_pdata(struct device *dev,
>
> asking to remove, but xeiv != xceiv :-)
>
>> + struct nop_usb_xceiv_platform_data *pdata)
>> +{
>> + struct device_node *node = dev->of_node;
>> + u32 clk_rate;
>> +
>> + if (!of_property_read_u32(node, "clock-frequency", &clk_rate))
>> + pdata->clk_rate = clk_rate;
>> +}
>> +
>> static int nop_usb_xceiv_probe(struct platform_device *pdev)
>> {
>> + struct device *dev = &pdev->dev;
>> struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data;
>> struct nop_usb_xceiv *nop;
>> enum usb_phy_type type = USB_PHY_TYPE_USB2;
>> @@ -153,6 +165,17 @@ static int nop_usb_xceiv_probe(struct platform_device *pdev)
>> if (!nop->phy.otg)
>> return -ENOMEM;
>>
>> + if (dev->of_node) {
>> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
>> + if (!pdata) {
>> + dev_err(dev, "Memory allocation failure\n");
>> + return -ENOMEM;
>> + }
>> + nop_xeiv_get_dt_pdata(dev, pdata);
>
> actually, I would prefer to not create pdata at all. I mean, ideally
> pdata would be used to initialize fields in your own structure, so first
> move clk_rate to your own private structure, copy pdata's clk_rate value
> to that, then you don't need this hackery when using DT.
>
OK, got it. Will revise.
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
