On 18/01/13 15:32, Santosh Shilimkar wrote:
> From: Rajendra Nayak <rnayak@xxxxxx>
>
> Specify both secure as well as nonsecure PPI IRQ for arch
> timer. This fixes the following errors seen on DT OMAP5 boot..
>
> [ 0.000000] arch_timer: No interrupt available, giving up
>
> Cc: Benoit Cousson <b-cousson@xxxxxx>
>
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
> ---
> arch/arm/boot/dts/omap5.dtsi | 16 ++++++++++++----
> 1 file changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index 790bb2a..7a78d1b 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -35,8 +35,12 @@
> compatible = "arm,cortex-a15";
> timer {
> compatible = "arm,armv7-timer";
> - /* 14th PPI IRQ, active low level-sensitive */
> - interrupts = <1 14 0x308>;
> + /*
> + * PPI secure/nonsecure IRQ,
> + * active low level-sensitive
> + */
> + interrupts = <1 13 0x308>,
> + <1 14 0x308>;
Care to add the virtual and HYP timer interrupts? So KVM can get a
chance to run on this HW...
> clock-frequency = <6144000>;
> };
> };
> @@ -44,8 +48,12 @@
> compatible = "arm,cortex-a15";
> timer {
> compatible = "arm,armv7-timer";
> - /* 14th PPI IRQ, active low level-sensitive */
> - interrupts = <1 14 0x308>;
> + /*
> + * PPI secure/nonsecure IRQ,
> + * active low level-sensitive
> + */
> + interrupts = <1 13 0x308>,
> + <1 14 0x308>;
Same here.
> clock-frequency = <6144000>;
> };
> };
>
Thanks,
M.
--
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
