Re: [PATCH] ARM: OMAP2: Fix missing omap2xxx_clkt_vps_xxx function calls

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Paul,

On 01/17/2013 05:24 PM, Paul Walmsley wrote:
> 
> Here's the updated version (at the bottom of this message). Seems to work 
> based on a quick test on 2430SDP.
> 
> # shutdown -r -n now
> shutdown: sending all processes the TERM signal...
> shutdown: sending all processes the KILL signal.
> shutdown: turning off swap
> shutdown: unmounting all file systems
> umount: /debug: not mounted
> umount: /run/shm: not mounted
> umount: /dev: not mounted
> umount: /tmp: not mounted
> umount: /run/lock: not mounted
> umount: /run: not mounted
> umount: /lib/init/rw: not found
> Please stand by while rebooting the system.
> [   79.635925] Disabling non-boot CPUs ...
> [   79.640197] Restarting system.
> 
> 
> U-Boot 1.1.4 (Mar 18 2007 - 12:22:00)
> 
> OMAP2430C-GP revision 3, PRCM #5A
> TI 2430SDP 1.1 Version + mDDR (Boot NOR)
> DRAM:  128 MB
> Flash: 192 MB
> NAND:64 MB
> In:    serial
> Out:   serial
> Err:   serial
> Hit any key to stop autoboot:  0 
> 
> 
> ... etc. ...
> 
> 
> - Paul
> 
> 
> From: Jon Hunter <jon-hunter@xxxxxx>
> Date: Thu, 10 Jan 2013 14:53:29 -0600
> Subject: [PATCH] ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function
>  calls
> 
> During the migration to the common clock framework, calls to the
> functions omap2xxx_clkt_vps_late_init() were not preserved for
> OMAP2420 and OMAP2430. This causes the variables "sys_ck_rate" and
> "curr_prcm_set" to be uninitialised on boot. On reboot, this causes the
> following error message to be displayed because the appropriate MPU
> clock frequency (derived from sys_ck_rate) cannot be found.
> 
> "Could not set MPU rate to 4294MHz"
> 
> Fix this by adding back calls to omap2xxx_clkt_vps_late_init() in the
> OMAP2420 and OMAP2430 clock initialisation code.
> 
> Signed-off-by: Jon Hunter <jon-hunter@xxxxxx>
> [paul@xxxxxxxxx: dropped the duplicated call to
>  omap2xxx_clkt_vps_check_bootloader_rates() after consultation with Jon;
>  updated patch description]
> Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
> ---
>  arch/arm/mach-omap2/cclock2420_data.c |    2 ++
>  arch/arm/mach-omap2/cclock2430_data.c |    2 ++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c
> index 7e5febe..ab7e952 100644
> --- a/arch/arm/mach-omap2/cclock2420_data.c
> +++ b/arch/arm/mach-omap2/cclock2420_data.c
> @@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void)
>  			omap2_init_clk_hw_omap_clocks(c->lk.clk);
>  	}
>  
> +	omap2xxx_clkt_vps_late_init();
> +
>  	omap2_clk_disable_autoidle_all();
>  
>  	omap2_clk_enable_init_clocks(enable_init_clks,
> diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c
> index eda079b..eb3dab6 100644
> --- a/arch/arm/mach-omap2/cclock2430_data.c
> +++ b/arch/arm/mach-omap2/cclock2430_data.c
> @@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void)
>  			omap2_init_clk_hw_omap_clocks(c->lk.clk);
>  	}
>  
> +	omap2xxx_clkt_vps_late_init();
> +
>  	omap2_clk_disable_autoidle_all();
>  
>  	omap2_clk_enable_init_clocks(enable_init_clks,

Thanks! Looks good to me.

Jon

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux