On Wed, Dec 12, 2012 at 11:11 AM, Benoit Cousson <b-cousson@xxxxxx> wrote: > Hi Javier, > > On 12/12/2012 09:25 AM, Javier Martinez Canillas wrote: >> On Mon, Dec 3, 2012 at 1:41 PM, Javier Martinez Canillas >> <javier.martinez@xxxxxxxxxxxxxxx> wrote: >>> IGEP technology devices are TI OMAP3 SoC based industrial embedded >>> and computer-on-module boards. This patch-set adds initial device >>> tree support for these devices. >>> >>> The device trees allows to boot from an MMC and are working all the >>> components that already have device tree support on OMAP3 SoCs: >>> >>> - MMC/SD >>> - UARTs >>> - GPIO LEDs >>> - TWL4030 codec audio >>> - pinmux/pinconf pinctrl >>> >>> Some peripheral are still not working such as Flash storage and >>> Ethernet but support for these will also be included once the >>> OMAP GPMC device tree binding patches land on mainline. >>> >>> This is a v3 of the patch-set that solves issues pointed out by >>> Enric Balletbo and Benoit Cousson. >>> >>> The patch-set is composed of the following patches: >>> >>> [PATCH v3 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices >>> [PATCH v3 2/3] ARM/dts: omap3: Add support for IGEPv2 board >>> [PATCH v3 3/3] ARM/dts: omap3: Add support for IGEP COM Module >>> >>> Best regards, >>> Javier >>> -- >> >> Hi Benoit and Tony, >> >> Any comments on these? > > Nope, that's fine. I'll applied the series for 3.9. > > Thanks, > Benoit > > Great, thanks a lot for! Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
