Hi Javier, On 12/12/2012 09:25 AM, Javier Martinez Canillas wrote: > On Mon, Dec 3, 2012 at 1:41 PM, Javier Martinez Canillas > <javier.martinez@xxxxxxxxxxxxxxx> wrote: >> IGEP technology devices are TI OMAP3 SoC based industrial embedded >> and computer-on-module boards. This patch-set adds initial device >> tree support for these devices. >> >> The device trees allows to boot from an MMC and are working all the >> components that already have device tree support on OMAP3 SoCs: >> >> - MMC/SD >> - UARTs >> - GPIO LEDs >> - TWL4030 codec audio >> - pinmux/pinconf pinctrl >> >> Some peripheral are still not working such as Flash storage and >> Ethernet but support for these will also be included once the >> OMAP GPMC device tree binding patches land on mainline. >> >> This is a v3 of the patch-set that solves issues pointed out by >> Enric Balletbo and Benoit Cousson. >> >> The patch-set is composed of the following patches: >> >> [PATCH v3 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices >> [PATCH v3 2/3] ARM/dts: omap3: Add support for IGEPv2 board >> [PATCH v3 3/3] ARM/dts: omap3: Add support for IGEP COM Module >> >> Best regards, >> Javier >> -- > > Hi Benoit and Tony, > > Any comments on these? Nope, that's fine. I'll applied the series for 3.9. Thanks, Benoit -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
