[PATCH 5/5] RFC: ARM: OMAP: Prepare Kconfig and Makefiles for enabling ARCH_MULTIPLATFORM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Not intended for merging yet as few more drivers need
work. You may need to update your config to make sure
you have:

CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_OMAP2PLUS=y

And may need CONFIG_ARCH_MULTI_V6=y too.

The omap2plus_defconfig has been updated in this patch.
---
 arch/arm/Kconfig                     |   13 ++++++++++---
 arch/arm/configs/omap2plus_defconfig |    2 +-
 arch/arm/mach-omap2/Kconfig          |   23 +++++++++++++++++++++++
 arch/arm/mach-omap2/Makefile         |    3 +++
 arch/arm/plat-omap/Kconfig           |   30 ------------------------------
 arch/arm/plat-omap/Makefile          |    2 ++
 6 files changed, 39 insertions(+), 34 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 041cf07..8d955b1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -928,17 +928,24 @@ config ARCH_DAVINCI
 	help
 	  Support for TI's DaVinci platform.
 
-config ARCH_OMAP
-	bool "TI OMAP"
+config ARCH_OMAP1
+	bool "TI OMAP1"
 	depends on MMU
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
 	select HAVE_CLK
+	select HAVE_IDE
+	select IRQ_DOMAIN
+	select NEED_MACH_IO_H if PCCARD
+	select NEED_MACH_MEMORY_H
 	help
-	  Support for TI's OMAP platform (OMAP1/2/3/4).
+	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
 
 config ARCH_VT8500
 	bool "VIA/WonderMedia 85xx"
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 6230304..35907ab 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -20,7 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_ARM_THUMBEE=y
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index c81bc50..fbd3f20 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,3 +1,26 @@
+config ARCH_OMAP
+	bool
+
+config ARCH_OMAP2PLUS
+	bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_OMAP
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select HAVE_CLK
+	select OMAP_DM_TIMER
+	select PINCTRL
+	select PROC_DEVICETREE if PROC_FS
+	select SPARSE_IRQ
+	select USE_OF
+	help
+	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
+
+
 if ARCH_OMAP2PLUS
 
 menu "TI OMAP2/3/4 Specific Features"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 4a6e6d5..ca47d7a 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -2,6 +2,9 @@
 # Makefile for the linux kernel.
 #
 
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+	-I$(srctree)/arch/arm/plat-omap/include
+
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 82fcb20..fd440fb 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -5,36 +5,6 @@ menu "TI OMAP Common Features"
 config ARCH_OMAP_OTG
 	bool
 
-choice
-	prompt "OMAP System Type"
-	default ARCH_OMAP2PLUS
-
-config ARCH_OMAP1
-	bool "TI OMAP1"
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select NEED_MACH_IO_H if PCCARD
-	select NEED_MACH_MEMORY_H
-	help
-	  "Systems based on omap7xx, omap15xx or omap16xx"
-
-config ARCH_OMAP2PLUS
-	bool "TI OMAP2/3/4"
-	select CLKDEV_LOOKUP
-	select GENERIC_IRQ_CHIP
-	select OMAP_DM_TIMER
-	select PINCTRL
-	select PROC_DEVICETREE if PROC_FS
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
-
-endchoice
-
 comment "OMAP Feature Selections"
 
 config OMAP_DEBUG_DEVICES
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 8d88584..cfc3372 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -2,6 +2,8 @@
 # Makefile for the linux kernel.
 #
 
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-omap/include
+
 # Common support
 obj-y := sram.o dma.o fb.o counter_32k.o
 obj-m :=

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux