On 11/21/2012 03:43 PM, Felipe Balbi wrote:
> On Thu, Nov 15, 2012 at 04:34:06PM +0200, Roger Quadros wrote:
>> prevents getting clocks that don't exist on the platform.
>>
>> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
>> ---
>> drivers/mfd/omap-usb-host.c | 47 ++++++++++++++++++++++++++++++++-----------
>> 1 files changed, 35 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
>> index 44772ae..ad89939 100644
>> --- a/drivers/mfd/omap-usb-host.c
>> +++ b/drivers/mfd/omap-usb-host.c
>> @@ -94,6 +94,7 @@ struct usbhs_port {
>> };
>>
>> struct usbhs_hcd_omap {
>> + int nports;
>> struct usbhs_port port[MAX_HS_USB_PORTS];
>>
>> struct clk *xclk60mhsp1_ck;
>> @@ -291,7 +292,7 @@ static int usbhs_runtime_resume(struct device *dev)
>> if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
>> clk_enable(omap->ehci_logic_fck);
>>
>> - for (i = 0; i < MAX_HS_USB_PORTS; i++) {
>> + for (i = 0; i < omap->nports; i++) {
>> if (is_ehci_tll_mode(pdata->port_mode[i])) {
>> if (omap->port[i].utmi_clk) {
>> r = clk_enable(omap->port[i].utmi_clk);
>> @@ -320,7 +321,7 @@ static int usbhs_runtime_suspend(struct device *dev)
>>
>> spin_lock_irqsave(&omap->lock, flags);
>>
>> - for (i = 0; i < MAX_HS_USB_PORTS; i++) {
>> + for (i = 0; i < omap->nports; i++) {
>> if (is_ehci_tll_mode(pdata->port_mode[i])) {
>> if (omap->port[i].utmi_clk)
>> clk_disable(omap->port[i].utmi_clk);
>> @@ -360,8 +361,6 @@ static void omap_usbhs_init(struct device *dev)
>>
>> pm_runtime_get_sync(dev);
>> spin_lock_irqsave(&omap->lock, flags);
>> - omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
>> - dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
>>
>> reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
>> /* setup ULPI bypass and burst configurations */
>> @@ -502,8 +501,32 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
>> omap->pdata = pdata;
>> platform_set_drvdata(pdev, omap);
>>
>> + pm_runtime_enable(dev);
>> + pm_runtime_get_sync(dev);
>> + omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
>> +
>> + /* we need to call runtime suspend before we update omap->nports
>> + * to prevent unbalanced clk_disable()
>> + */
>
> wrong comment style.
>
>> + pm_runtime_put_sync(dev);
>
> does it *really* need to be a synchronous put ?
No, I'll replace it by the asynchronous variant.
>
>> +
>> + switch (omap->usbhs_rev) {
>> + case OMAP_USBHS_REV1:
>> + omap->nports = 3;
>> + break;
>> + case OMAP_USBHS_REV2:
>> + omap->nports = 2;
>> + break;
>> + default:
>> + omap->nports = MAX_HS_USB_PORTS;
>> + dev_info(dev,
>> + "USB HOST Rev : 0x%d not recognized, assuming %d ports\n",
>> + omap->usbhs_rev, omap->nports);
>
> please make this dev_dbg().
>
IMHO, I think this should be displayed on the console as the driver
doesn't really support that revision and might need to be upgraded. It
won't be displayed for existing hardware that we know about till date.
>> + break;
>> + }
>> +
>> need_logic_fck = false;
>> - for (i = 0; i < MAX_HS_USB_PORTS; i++) {
>> + for (i = 0; i < omap->nports; i++) {
>> if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
>> is_ehci_hsic_mode(i))
>> need_logic_fck |= true;
>> @@ -538,7 +561,7 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
>> goto err_init60m;
>> }
>>
>> - for (i = 0; i < MAX_HS_USB_PORTS; i++) {
>> + for (i = 0; i < omap->nports; i++) {
>> struct clk *pclk;
>> char utmi_clk[] = "usb_host_hs_utmi_px_clk";
>>
>> @@ -588,8 +611,6 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
>> }
>>
>>
>> - pm_runtime_enable(dev);
>
> moving this part around isn't part of $SUBJECT aparently.
pm_runtime_enable is moved earlier so that we can read the REVISION
register, so it is part of $SUBJECT.
>
>> -
>> omap_usbhs_init(dev);
>> ret = omap_usbhs_alloc_children(pdev);
>> if (ret) {
>> @@ -597,15 +618,15 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
>> goto err_alloc;
>> }
>>
>> + pr_info("OMAP USB HOST : revision 0x%x, ports %d\n",
>> + omap->usbhs_rev, omap->nports);
>
> please remove this pr_info() as it doesn't add anything other than noise
> to bootup, IMHO.
OK.
>
>> return 0;
>>
>> err_alloc:
>> omap_usbhs_deinit(&pdev->dev);
>> -
>> - pm_runtime_disable(dev);
>> iounmap(omap->uhh_base);
>>
>> - for (i = 0; i < MAX_HS_USB_PORTS; i++)
>> + for (i = 0; i < omap->nports; i++)
>> clk_put(omap->port[i].utmi_clk);
>>
>> clk_put(omap->init_60m_fclk);
>> @@ -619,6 +640,8 @@ err_xclk60mhsp2:
>> err_xclk60mhsp1:
>> clk_put(omap->ehci_logic_fck);
>>
>> + pm_runtime_disable(dev);
>> +
>> err_remap:
>> kfree(omap);
>> return ret;
>> @@ -639,7 +662,7 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev)
>> pm_runtime_disable(&pdev->dev);
>> iounmap(omap->uhh_base);
>>
>> - for (i = 0; i < MAX_HS_USB_PORTS; i++)
>> + for (i = 0; i < omap->nports; i++)
>> clk_put(omap->port[i].utmi_clk);
>>
>> clk_put(omap->init_60m_fclk);
>> --
>> 1.7.4.1
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
