> Boot tests: > > * AM335x Beaglebone: omap2plus_defconfig kernels don't boot > - May be fixed now, pending retest: > - http://marc.info/?l=linux-omap&m=135082257727502&w=2 > - Not yet part of the automated test suite > * May be due to an old U-boot with FDT support problems used here? > Pending local investigation and re-test I'm also trying to boot 3.7-rc5, but my board has console on ttyO3. So I took arch/arm/boot/dts/am335x-evm.dts and replaced uart definition to uart4: serial@481a6000 { status = "okay"; }; is it sufficient? In u-boot commit 59852d03867108217fe88e3bfc3e1e9cedfe63c5 Merge: 22b6fcb b3e5cd1 Author: Tom Rini <trini@xxxxxx> Date: Fri Nov 9 08:47:25 2012 -0700 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze I use following commands and get following output: U-Boot# mmc rescan ; fatload mmc 0 82000000 uImage;fatload mmc 0 80000000 am335x-evm.dtb reading uImage 4222584 bytes read reading am335x-evm.dtb 5172 bytes read U-Boot# fdt addr 80000000; fdt resize; bootm 82000000 - 80000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-3.7.0-rc5-00028-g79e979e Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4222520 Bytes = 4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=80000000 size=2000 Loading Device Tree to 8fe64000, end 8fe68fff ... OK Starting kernel ... I force kernel to use default params, so I don't specify them in u-boot. Any idea? Best regards, Yegor -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
