Hi Mike, Thank you for the patches. On Wednesday 07 November 2012 17:12:35 Mike Turquette wrote: > From: Mike Turquette <mturquette@xxxxxxxxxx> > > Hi all, > > This series is based on top of Paul's PRM/CM clean-up work. It is a > refresh of the patches Rajendra sent out a while back[1], with the > addition of several fixes for PM regressions[2] across several > platforms. > > I have tested on OMAP4430 Panda including PRCM diffing against pre-CCF > patches (delta is zero) and also suspend/resume. > > I also tested on OMAP4460 Panda-ES. Boot is fine and PRCM programming > appears sane. However Panda-ES never comes back from suspend/resume. > This problem exists on the PRM/CM branch I based on and was not > introduced by this series. I am investigating that independently of > this series. > > Anyone wanting to pull the work can find it at: > git://git.linaro.org/people/mturquette/linux.git clk-omap-3.8 > > [1] http://article.gmane.org/gmane.linux.ports.arm.omap/78771 > [2] http://article.gmane.org/gmane.linux.ports.arm.omap/84015 I've tested the whole series on a Beagleboard-xM. The kernel boots fine but spits a couple of WARN_ON due to missing clk_prepare in USB-related drivers. I haven't noticed any regression in the OMAP3 ISP driver. I've also successfully tested rate back-propagation (CLK_SET_RATE_PARENT) on the dpll4_m5x2_ck and cam_mclk clocks with the OMAP3 ISP driver. I'll send a patch for that on top of your v3. So, Tested-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
