Re: [RFC] Device Tree Overlays Proposal (Was Re: capebus moving omap_devices to mach-omap2)

"Cousson, Benoit" <b-cousson@xxxxxx> · Thu, 8 Nov 2012 11:36:54 +0100

+ Peter

Hi Stephen,

On 11/7/2012 6:25 PM, Stephen Warren wrote:
On 11/07/2012 03:19 AM, Benoit Cousson wrote:
Hi Panto,

On 11/07/2012 09:13 AM, Pantelis Antoniou wrote:
Hi Grant

On Nov 6, 2012, at 9:45 PM, Grant Likely wrote:

On Tue, Nov 6, 2012 at 7:34 PM, Pantelis Antoniou
<panto@xxxxxxxxxxxxxxxxxxxxxxx> wrote:

[ snip ]

g.

Since we've started talking about longer term goals, and the versioning
provision seems to stand, I hope we address how much the fragment versioning
thing is similar to the way board revisions progress.

If a versioning syntax is available then one could create a single DT
file for a bunch of 'almost' similar board and board revisions.

I even think that the version issue is probably much more important for the short term than the overlay aspect. Well at least as important. We start having as well a bunch a panda board version with different HW setup.

Having a single board-XXX.dts that will support all these versions is probably the best approach to avoid choosing that from the bootloader.

We need to figure out a format + mechanism compatible with the current non-versioned format to allow filtering the nodes at runtime to keep only the relevant one.

Something that can find the driver that will provide the proper board version or subsystem version or whatever like that:

	compatible-version = "ti,panda-version", "panda";

Then at runtime we should create only the node with the correct match between the driver version and the string version.

/* regular panda audio routing */
sound: sound {
	compatible = "ti,abe-twl6040";
	ti,model = "PandaBoard";
	compatible-version = "ti,panda-version", "panda";

	/* Audio routing */
	ti,audio-routing =
		"Headset Stereophone", "HSOL",
		"Headset Stereophone", "HSOR",
		"Ext Spk", "HFL",
		"Ext Spk", "HFR",
		"Line Out", "AUXL",
		"Line Out", "AUXR",
		"HSMIC", "Headset Mic",
		"Headset Mic", "Headset Mic Bias",
		"AFML", "Line In",
		"AFMR", "Line In";
};

/* Audio routing is different between PandaBoard4430 and PandaBoardES */
&sound {
	ti,model = "PandaBoardES";
	compatible-version = "ti,panda-version", "panda-es";

	/* Audio routing */
	ti,audio-routing =
		"Headset Stereophone", "HSOL",
		"Headset Stereophone", "HSOR",
		"Ext Spk", "HFL",
		"Ext Spk", "HFR",
		"Line Out", "AUXL",
		"Line Out", "AUXR",
		"AFML", "Line In",
		"AFMR", "Line In";
};

Maybe some extra version match table can just be passed during the board machine_init

	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL, panda_version_match_table);

Is the only difference here the content of the ti,audio-routing
property? If so, then I don't think there's any need for infra-structure
for this; the driver code already reads that property and adjusts its
behaviour based upon it.

That was just an example, and maybe not the best one. It could be any 
kind of HW differences, like a different GPIO line, a different I2C 
peripheral, an extra DCDC...
The point was just that you might have several version of the same node 
with different attributes depending of the board revision.

Regards,
Benoit

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html