OMAP3 Beagle-XM board specific data for usb2 host device tree node is included. In Beagle XM board , the port 2 of usb host is connected to a hub with ethernet interface. Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx> --- arch/arm/boot/dts/omap3-beagle-xm.dts | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index c38cf76..b9f8667 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -113,3 +113,35 @@ */ ti,pulldowns = <0x03a1c4>; }; + +&usbhs { + /* + * Maximum fill 3 port info. + * port configured can be any one of the following values + * OMAP_USBHS_PORT_MODE_UNUSED = 0, + * OMAP_EHCI_PORT_MODE_PHY = 1, + * OMAP_EHCI_PORT_MODE_TLL = 2, + * OMAP_EHCI_PORT_MODE_HSIC = 3, + * OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0 = 4, + * OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM = 5, + * OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0 = 6, + * OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM = 7, + * OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0 = 8, + * OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM = 9, + * OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0 = 10, + * OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM = 11, + * OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0 = 12, + * OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM = 13, + */ + port-0 = <0>; + port-1 = <1>; + port-2 = <0>; + + /* + * gpio resets should be given the format ( Max of 3 ports) + * reset-gpio-1 = <&gpiox x x> + * reset-gpio-2 = <&gpiox x x> + * reset-gpio-3 = <&gpiox x x> + */ + reset-gpio-2 = <&gpio5 19 0>; /* gpio 147 */ +}; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html