OMAP3 Beagle-XM board specific data for usb2 host device tree node
is included.
In Beagle XM board , the port 2 of usb host is connected to a hub
with ethernet interface.
Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx>
---
arch/arm/boot/dts/omap3-beagle-xm.dts | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index c38cf76..b9f8667 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -113,3 +113,35 @@
*/
ti,pulldowns = <0x03a1c4>;
};
+
+&usbhs {
+ /*
+ * Maximum fill 3 port info.
+ * port configured can be any one of the following values
+ * OMAP_USBHS_PORT_MODE_UNUSED = 0,
+ * OMAP_EHCI_PORT_MODE_PHY = 1,
+ * OMAP_EHCI_PORT_MODE_TLL = 2,
+ * OMAP_EHCI_PORT_MODE_HSIC = 3,
+ * OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0 = 4,
+ * OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM = 5,
+ * OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0 = 6,
+ * OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM = 7,
+ * OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0 = 8,
+ * OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM = 9,
+ * OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0 = 10,
+ * OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM = 11,
+ * OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0 = 12,
+ * OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM = 13,
+ */
+ port-0 = <0>;
+ port-1 = <1>;
+ port-2 = <0>;
+
+ /*
+ * gpio resets should be given the format ( Max of 3 ports)
+ * reset-gpio-1 = <&gpiox x x>
+ * reset-gpio-2 = <&gpiox x x>
+ * reset-gpio-3 = <&gpiox x x>
+ */
+ reset-gpio-2 = <&gpio5 19 0>; /* gpio 147 */
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
