Hi Avinash, On 10/30/2012 10:41 AM, Philip, Avinash wrote: > On Mon, Oct 29, 2012 at 14:40:02, Philip, Avinash wrote: >> On Thu, Oct 18, 2012 at 18:56:55, Porter, Matt wrote: >>> Adds AM33XX SPI support for am335x-bone and am335x-evm. > > Matt, > > Can you build SPI DT patch with DMA support on top of SPI DT patch > I submitted [1]. With the patch [1] SPI can work on PIO mode. > So we can have basic SPI support available in 3.8. > > Benoit, > Can you accept the SPI DT patch [1] Yes, I've just applied it in for_3.8/dts branch > In case if you want I will resubmit a patch with subject line modified. No, that's fine. Thanks, Benoit > > Current subject line > arm/dts: AM33XX: Add SPI device tree data > > 1. https://patchwork.kernel.org/patch/1470661/ > > Thanks > Avinash > >>> >>> Signed-off-by: Matt Porter <mporter@xxxxxx> >>> --- >>> arch/arm/boot/dts/am335x-bone.dts | 17 +++++++++++++++ >>> arch/arm/boot/dts/am335x-evm.dts | 9 ++++++++ >>> arch/arm/boot/dts/am33xx.dtsi | 43 +++++++++++++++++++++++++++++++++++++ >>> 3 files changed, 69 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts >>> index 5510979..23edfd8 100644 >>> --- a/arch/arm/boot/dts/am335x-bone.dts >>> +++ b/arch/arm/boot/dts/am335x-bone.dts >>> @@ -18,6 +18,17 @@ >>> reg = <0x80000000 0x10000000>; /* 256 MB */ >>> }; >>> >>> + am3358_pinmux: pinmux@44e10800 { >>> + spi1_pins: pinmux_spi1_pins { >>> + pinctrl-single,pins = < >>> + 0x190 0x13 /* mcasp0_aclkx.spi1_sclk, OUTPUT_PULLUP | MODE3 */ >>> + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */ >>> + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */ >>> + 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */ >>> + >; >>> + }; >>> + }; >>> + >> >> Change to am33xx_pinmux. >> >>> ocp { >>> uart1: serial@44e09000 { >>> status = "okay"; >>> @@ -84,3 +95,9 @@ >>> &mmc1 { >>> vmmc-supply = <&ldo3_reg>; >>> }; >>> + >>> +&spi1 { >>> + status = "okay"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&spi1_pins>; >>> +}; >>> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts >>> index d63fce8..8d5f660 100644 >>> --- a/arch/arm/boot/dts/am335x-evm.dts >>> +++ b/arch/arm/boot/dts/am335x-evm.dts >>> @@ -124,3 +124,12 @@ >>> &mmc1 { >>> vmmc-supply = <&vmmc_reg>; >>> }; >>> + >>> +&spi0 { >>> + status = "okay"; >>> + spi-flash@0 { >>> + compatible = "spansion,s25fl064k", "m25p80"; >>> + spi-max-frequency = <24000000>; >>> + reg = <0>; >>> + }; >>> +}; >> >> In AM335x-evm, SPI flash available in profile #2 (am335x evm specific profiles). >> So can you drop this changes as if I understood correctly, am335x-evm.dts will be >> populated for devices present only on profile #0. >> >>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi >>> index 26a6af7..063ecea 100644 >>> --- a/arch/arm/boot/dts/am33xx.dtsi >>> +++ b/arch/arm/boot/dts/am33xx.dtsi >>> @@ -40,6 +40,15 @@ >>> }; >>> }; >>> >>> + am3358_pinmux: pinmux@44e10800 { >>> + compatible = "pinctrl-single"; >>> + reg = <0x44e10800 0x0238>; >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + pinctrl-single,register-width = <32>; >>> + pinctrl-single,function-mask = <0x7f>; >>> + }; >>> + >> >> Pin ctrl support already submitted >> http://git.kernel.org/?p=linux/kernel/git/bcousson/linux-omap-dt.git;a=commitdiff;h=3e0603e905d9ba662e8c1885ecb1d28bc454e448 >> >> Thanks >> Avinash >> >>> /* >>> * XXX: Use a flat representation of the AM33XX interconnect. >>> * The real AM33XX interconnect network is quite complex.Since >>> @@ -261,6 +270,40 @@ >>> status = "disabled"; >>> }; >>> >>> + spi0: spi@48030000 { >>> + compatible = "ti,omap4-mcspi"; >>> + ti,hwmods = "spi0"; >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + reg = <0x48030000 0x400>; >>> + interrupt-parent = <&intc>; >>> + interrupt = <65>; >>> + dmas = <&edma 16 >>> + &edma 17 >>> + &edma 18 >>> + &edma 19>; >>> + dma-names = "tx0", "rx0", "tx1", "rx1"; >>> + ti,spi-num-cs = <2>; >>> + status = "disabled"; >>> + }; >>> + >>> + spi1: spi@481a0000 { >>> + compatible = "ti,omap4-mcspi"; >>> + ti,hwmods = "spi1"; >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + reg = <0x481a0000 0x400>; >>> + interrupt-parent = <&intc>; >>> + interrupt = <125>; >>> + dmas = <&edma 42 >>> + &edma 43 >>> + &edma 44 >>> + &edma 45>; >>> + dma-names = "tx0", "rx0", "tx1", "rx1"; >>> + ti,spi-num-cs = <2>; >>> + status = "disabled"; >>> + }; >>> + >>> wdt2: wdt@44e35000 { >>> compatible = "ti,omap3-wdt"; >>> ti,hwmods = "wd_timer2"; >>> -- >>> 1.7.9.5 >>> >>> >>> _______________________________________________ >>> linux-arm-kernel mailing list >>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx >>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >>> >> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
