Hi Benoit,
On Monday 29 October 2012 10:14 PM, Benoit Cousson wrote:
Hi Sourav,
On 10/29/2012 11:40 AM, Sourav Poddar wrote:
Add keypad data node in omap5-evm.
Based on I2C support patch for omap5, which has been
already posted as a different series.
Tested on omap5430 evm with 3.7-rc1 kernel.
Cc: Felipe Balbi <balbi@xxxxxx>
Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Tested on omap5430 sdp with 3.7-rc1 kernel.
Signed-off-by: Sourav Poddar <sourav.poddar@xxxxxx>
---
arch/arm/boot/dts/omap5-evm.dts | 95 +++++++++++++++++++++++++++++++++++++++
1 files changed, 95 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index c663eba..b812d6d 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -140,3 +140,98 @@
&mcbsp3 {
status = "disabled";
};
+
+&i2c5 {
+ clock-frequency = <400000>;
+
+ smsc@38 {
+ compatible = "smscece1099";
+ reg = <0x38>;
+ clock = <0x13>;
What does that "clock" mean?
This chip supports a clock control register which is used to enable the
interface used by the chip to communicate. Here, the interface which you
can are
SMBUS interface or BC-LINK interface.
I cannot find that in the binding documentation. BTW, did you add that
documentation in the driver patch?
Nope, I missed out on the dt binding documentation for the driver. :(
Will send a seperate patch for the bindings.
Regards,
Benoit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
