Re: Errors at boot time from OMAP4430SDP (and a whinge about serial stuff)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tony Lindgren <tony@xxxxxxxxxxx> writes:

> * Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx> [121023 03:12]:
>> On Fri, Oct 12, 2012 at 04:54:34PM +0100, Russell King - ARM Linux wrote:
>> > For those who don't bother looking at my kautobuild boot tests on the OMAP
>> > boards I have, here's the errors which get spat out at boot time.  Note
>> > that some of these I've reported in the past, and one of them is missing
>> > a newline character at the end of its string.
>> > 
>> > twd: can't register interrupt 45 (-22)
>> > twd_local_timer_register failed -22
>> > omap_hwmod: mcpdm: cannot be enabled for reset (3)
>> > omap-gpmc omap-gpmc: error: clk_get
>> > omap-gpmc: probe of omap-gpmc failed with error -2
>> > Error setting wl12xx data: -38
>> > omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
>> > omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
>> > omap_hsmmc omap_hsmmc.4: Failed to get debounce clk
>> > twl6040-codec twl6040-codec: ASoC: Failed to create Capture debugfs file
>> > omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
>> > omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).Power Management for TI OMAP4.
>> > mmc1: host does not support reading read-only switch. assuming write-enable.
>> 
>> Here's the latest set of error like messages, thanks to the kautobuild
>> system:
>> 
>> omap_hwmod: mcpdm: cannot be enabled for reset (3)
>> Error setting wl12xx data: -38
>
> That's now fixed up and I've queued it.
>
>> omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
>> omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
>> omap_hsmmc omap_hsmmc.4: Failed to get debounce clk
>> omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
>> omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).Power Management for TI OMAP4.
>> mmc1: host does not support reading read-only switch. assuming write-enable.
>> 
>> This looks much better compared to the previous set, but we could still
>> do with getting a "\n" on at least one of those messages...
>
> Kevin, do you have a patch for some of this?
>

I'll fix up the missing newline right away.

I was planning to leave the VC mismatch problem because it's fixed in
Tero's auto retention series.  However, I haven't been able to get to
that series yet due to all the regressions/bugfixes, so I'll at least
pull out the part that fixes up the mistmatch and submit it for v3.7.

Kevin

[1] http://marc.info/?l=linux-omap&m=134859084918176&w=2

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux