Re: Errors at boot time from OMAP4430SDP (and a whinge about serial stuff)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx> [121023 03:12]:
> On Fri, Oct 12, 2012 at 04:54:34PM +0100, Russell King - ARM Linux wrote:
> > For those who don't bother looking at my kautobuild boot tests on the OMAP
> > boards I have, here's the errors which get spat out at boot time.  Note
> > that some of these I've reported in the past, and one of them is missing
> > a newline character at the end of its string.
> > 
> > twd: can't register interrupt 45 (-22)
> > twd_local_timer_register failed -22
> > omap_hwmod: mcpdm: cannot be enabled for reset (3)
> > omap-gpmc omap-gpmc: error: clk_get
> > omap-gpmc: probe of omap-gpmc failed with error -2
> > Error setting wl12xx data: -38
> > omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
> > omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
> > omap_hsmmc omap_hsmmc.4: Failed to get debounce clk
> > twl6040-codec twl6040-codec: ASoC: Failed to create Capture debugfs file
> > omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
> > omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).Power Management for TI OMAP4.
> > mmc1: host does not support reading read-only switch. assuming write-enable.
> 
> Here's the latest set of error like messages, thanks to the kautobuild
> system:
> 
> omap_hwmod: mcpdm: cannot be enabled for reset (3)
> Error setting wl12xx data: -38

That's now fixed up and I've queued it.

> omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
> omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
> omap_hsmmc omap_hsmmc.4: Failed to get debounce clk
> omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
> omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).Power Management for TI OMAP4.
> mmc1: host does not support reading read-only switch. assuming write-enable.
> 
> This looks much better compared to the previous set, but we could still
> do with getting a "\n" on at least one of those messages...

Kevin, do you have a patch for some of this?

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux