On Thursday 25 October 2012 06:22 PM, Felipe Balbi wrote:
Hi,
On Thu, Oct 25, 2012 at 06:23:57PM +0530, Santosh Shilimkar wrote:
On Thursday 25 October 2012 05:55 PM, Felipe Balbi wrote:
on OMAP4+ we want to read IRQSTATUS_RAW register,
instead of IRQSTATUS. The reason being that IRQSTATUS
will only contain the bits which were enabled on
IRQENABLE_SET and that will break when we need to
poll for a certain bit which wasn't enabled as an
IRQ source.
One such case is after we finish converting to
deferred stop bit, we will have to poll for ARDY
bit before returning control for the client driver
in order to prevent us from trying to start a
transfer on a bus which is already busy.
Note, however, that omap-i2c.c needs a big rework
on register definition and register access. Such
work will be done in a separate series of patches.
Cc: Benoit Cousson <b-cousson@xxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
drivers/i2c/busses/i2c-omap.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index b004126..20f9ad6 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -271,8 +271,18 @@ static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
{
- return __raw_readw(i2c_dev->base +
+ /* if we are OMAP_I2C_IP_VERSION_2, we need to read from
+ * IRQSTATUS_RAW, but write to IRQSTATUS
+ */
+ if ((i2c_dev->dtrev == OMAP_I2C_IP_VERSION_2) &&
+ (reg == OMAP_I2C_STAT_REG)) {
Doing this check on every I2C register read seems to
expensive to me. Can you not sort this in init with some offset
which can be 0 or non zero ? Sorry in case this is already dicussed.
could be. I didn't go that route because I'm planning a complete rewrite
of all register accesses. The way it's done today is completely broken
and already expensive (with reg_shift and different map tables and so
on).
If it's really a big of a deal, I can try to find another way, maybe
just adding omap_i2c_read_stat() and limit the version check just to
I2C_STAT reads would do it for now...
Its a hot path since you read many I2C register reads, so getting
rid of that additional check will be good.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
