From: Kevin Hilman <khilman@xxxxxx> When debounce clocks are disabled, ensure that the banks dbck_enable_mask is cleared also. Otherwise, context restore on subsequent off-mode transition will restore previous value from the shadow copies (bank->context.debounce*) leading to mismatch state between driver state and hardware state. This was discovered when board code was doing gpio_request_one() gpio_set_debounce() gpio_free() which was leaving the GPIO debounce settings in a confused state. Then, enabling off mode causing bogus state to be restored, leaving GPIO debounce enabled which then prevented the CORE powerdomain from transitioning. Reported-by: Paul Walmsley <paul@xxxxxxxxx> Cc: Igor Grinberg <grinberg@xxxxxxxxxxxxxx> Signed-off-by: Kevin Hilman <khilman@xxxxxx> --- Applies on v3.7-rc2, targetted for v3.7. drivers/gpio/gpio-omap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 94cbc84..dee2856 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -187,6 +187,7 @@ static inline void _gpio_dbck_disable(struct gpio_bank *bank) * to detect events and generate interrupts at least on OMAP3. */ __raw_writel(0, bank->base + bank->regs->debounce_en); + bank->dbck_enable_mask = 0; clk_disable(bank->dbck); bank->dbck_enabled = false; -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
